{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M11A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M11A2000","canonicalUrl":"https://aoctrl.com/schneider/SH31003M11A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M11A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31003M11A2000, 1500 W continuous power, three-phase, 100 mm flange, 19 mm shaft with parallel key, absolute single-turn SinCos Hiperface encoder, IP54/IP65, natural convection cooling.","salesMarkdown":"## Motor ratings that shift with supply voltage The SH31003M11A2000: This SH3 series servo motor delivers 1500 W continuous power, but the nominal speed and torque depend on the supply you feed it. At 115 V single phase you get 500 rpm and 69.04 lbf.in (7.8 N.m); at 230 V single phase it runs 1000 rpm at 66.4 lbf.in (7.5 N.m); on 400 V three phase it reaches 2000 rpm at 62.0 lbf.in (7 N.m); and at 480 V three phase it tops out at 2400 rpm with 59.83 lbf.in (6.76 N.m). The continuous stall torque is 70.8 lbf.in (8 N.m) across the 115...480 V three-phase range, with a continuous stall current of 3.4 A. Peak stall torque hits 250.5 lbf.in (28.3 N.m) at 14.7 A for 3 seconds — useful for acceleration transients. ## Encoder and feedback — absolute single-turn Hiperface The motor carries an absolute single-turn SinCos Hiperface encoder — this gives position feedback on power-up without a homing cycle, which cuts commissioning time on multi-axis lines. The encoder type is fixed; the electrical connection uses a straight connector and a rotatable right-angled connector, so cable routing can be adjusted in the field. Back EMF constant is 148 V/krpm at 68 °F (20 °C), and the torque constant is 2.35 N.m/A at 248 °F (120 °C) copper hot — factor these into the drive tuning and thermal model. ## Mounting, shaft, and protection class The motor flange is 3.9 in (100 mm) with a centring collar diameter of 3.7 in (95 mm) and depth of 0.1 in (3.5 mm). The shaft is 0.7 in (19 mm) diameter, 1.6 in (40 mm) long, with a parallel key (0.2 in / 6 mm key width). Mounting holes are 0.4 in (9.0 mm) on the international standard flange pattern. IP rating is IP54 at the shaft bushing without a shaft seal ring, and IP65 on the motor body and with the shaft bushing seal fitted — both conforming to IEC 60034-5. For washdown environments, specify the shaft seal ring to get IP65 at the shaft exit. Cooling is natural convection, so no fan or external airflow is required.","metaTitle":"Schneider Electric SH31003M11A2000 Servo Motor, 1500 W","metaDescription":"Schneider Electric SH31003M11A2000 servo motor, 1500 W continuous power, three-phase, IP54/IP65, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6ee7cd91c461bc137dc92312e3e93451.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31003M11A2000/servo-motor-sh3-100-8nmkeysinglenobrake90conn-ip54-ip656k-rpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M11A2000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy SH31003M11A2000 and how do I get a price?","answer":"This part is available through independent distribution channels. No stock-holding claim is made — each order is quoted individually."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M11A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M11A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}