{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M11A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M11A2100","canonicalUrl":"https://aoctrl.com/schneider/SH31003M11A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M11A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31003M11A2100, 1500 W continuous power, 8 Nm continuous stall torque, 2000 rpm at 400 V three-phase, IP65, absolute single-turn SinCos Hiperface encoder, without holding brake.","salesMarkdown":"## Motor ratings and supply dependency The SH31003M11A2100 delivers 1500 W continuous power, but the nominal torque and speed depend on the supply voltage: at 400 V three-phase it produces 7 Nm at 2000 rpm, while at 480 V three-phase the torque drops to 6.76 Nm at 2400 rpm. Continuous stall torque is 8 Nm across the 115–480 V three-phase range, with a continuous stall current of 3.4 A — the motor holds that torque at zero speed without overheating, provided the natural convection cooling path is unobstructed. Peak stall torque reaches 28.3 Nm at 14.7 A for 3 seconds — useful for acceleration or overcoming static friction, but the drive must be sized to supply that peak current without tripping. ## Encoder, feedback, and connection The absolute single-turn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the drive reads the rotor angle directly from the encoder, which matters for applications that must resume position after a power loss. Electrical connection is via a straight connector or a rotatable right-angled connector — the rotatable option helps when cable clearance is tight in the cabinet or along the machine frame. ## Mechanical interface and load limits The motor mounts on an international standard flange with a 100 mm (3.9 in) flange size and a 95 mm centring collar — the four 9.0 mm mounting holes match the standard pattern for this frame size. Shaft is 19 mm diameter with a parallel key, 40 mm shaft length, and 6 mm key width — the IP65 shaft bushing conforms to IEC 60034-5, so the seal holds up in washdown environments provided the mating coupling does not impose axial loads beyond 160 N or radial loads above the speed-dependent limits (1050 N at 1000 rpm, 660 N at 4000 rpm). ## Electrical parameters for drive tuning Stator resistance is 5.3 Ω and stator inductance is 17.4 mH — these set the electrical time constant and influence the current-loop gains in the servo drive; the torque constant is 2.35 Nm/A at 120 °C copper temperature, and the back-EMF constant is 148 V/krpm at 20 °C. The 4-pole design means the electrical frequency at 2000 rpm is 66.7 Hz — the drive's current regulator must handle that bandwidth plus the switching ripple. Sourced through authorized distribution channels; quantities quoted to order against the BOM.","metaTitle":"Schneider Electric SH31003M11A2100 Servo Motor, 1500 W, 8 Nm","metaDescription":"Schneider Electric SH31003M11A2100 SH3 servo motor, 1500 W continuous power, 8 Nm continuous stall torque, IP65, absolute single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/70d618260fd07ca25f257cbf3854cc16.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31003M11A2100/sh3-servomotor-100mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M11A2100/alternatives.json"},"ai":{"faq":[{"question":"What is SH31003M11A2100's listed phase?","answer":"Three-phase operation is specified, with nominal speeds and torques given for 115 V single-phase, 230 V single-phase, 400 V three-phase, and 480 V three-phase supplies — the motor runs on either single or three phase depending on the drive connection."},{"question":"What is SH31003M11A2100's listed length?","answer":"Overall length is 9.5 inches (240.5 mm), not including the connector or shaft extension."},{"question":"What compliance documentation does Schneider Electric provide for SH31003M11A2100?","answer":"The IP65 rating conforms to IEC 60034-5 for both the motor body and the shaft bushing. No RoHS, REACH, or UL documentation is listed in the available spec record; confirm compliance documentation with the supplier at RFQ time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M11A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M11A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}