{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M11F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M11F2000","canonicalUrl":"https://aoctrl.com/schneider/SH31003M11F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M11F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31003M11F2000, SH3 series servo motor with holding brake, 1500 W continuous, 9 N·m holding torque, absolute single-turn SinCos Hiperface encoder, IP65, 100 mm flange.","salesMarkdown":"## 1500 W, 9 N·m holding brake — SH3 frame The SH31003M11F2000 is a 1500 W continuous-power servo motor with an integrated holding brake, rated 9 N·m holding torque — enough to lock a vertical axis on loss of power without a separate brake resistor or external holding circuit. Frame size is the SH3 100 mm flange with a 19 mm shaft and parallel key; the motor body length is 271.5 mm, which fits standard European servo mounts. ## Speed vs supply voltage — not a fixed rating Nominal speed depends on the drive supply: 500 rpm on 115 V single-phase, 1000 rpm on 230 V single-phase, 2000 rpm on 400 V three-phase, and 2400 rpm on 480 V three-phase. The torque curve shifts with voltage, so the drive selection must match the available line. Nominal torque also varies by supply: 7.8 N·m at 115 V single-phase, 7.5 N·m at 230 V single-phase, 7.0 N·m at 400 V three-phase, and 6.76 N·m at 480 V three-phase. The peak stall torque is 28.3 N·m across the three-phase range. ## Absolute Hiperface encoder — single-turn, no homing routine Encoder is absolute single-turn SinCos Hiperface — provides position at power-up without a reference run, which shaves seconds off each cycle in multi-axis pick-and-place or rotary indexing applications. Stator inductance is 17.4 mH and resistance 5.3 Ω; the torque constant is 2.35 N·m/A at 120 °C copper temperature, so the drive current loop can be tuned for low ripple at the 4-pole motor's electrical frequency. ## IP65 with shaft bushing — washdown-capable The motor achieves IP65 per IEC 60034-5 when the shaft bushing and seal ring are fitted; without the seal ring it's IP54 at the shaft exit. The connector is a straight or rotatable right-angle type, both rated for the same enclosure class. Maximum radial force at 2000 rpm is 830 N; at 4000 rpm it drops to 660 N. Axial force limit is 160 N — relevant for belt-driven loads where the radial load vector is higher than the belt tension.","metaTitle":"Schneider SH31003M11F2000 Servo Motor with Brake, 1500 W","metaDescription":"Schneider Electric SH31003M11F2000 servo motor with brake, 1500 W continuous, 9 N·m holding torque, absolute single-turn Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/dbec9a2308bcec09dead4ef6378b19d2.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH31003M11F2000/sh3-servomotor-100mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M11F2000/alternatives.json"},"ai":{"faq":[{"question":"What is SH31003M11F2000's listed phase?","answer":"The motor is a three-phase design, though it can also run on single-phase supplies at reduced speed and torque per the voltage-dependent ratings."},{"question":"What is the holding torque of the brake on SH31003M11F2000?","answer":"The integrated holding brake is rated 9 N·m (79.7 lbf·in). This is the static holding torque, not a dynamic braking rating — the brake holds the shaft stationary when power is removed."},{"question":"What encoder type does SH31003M11F2000 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. Single-turn means position is known within one revolution at power-up; multi-turn applications require a different encoder variant."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M11F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M11F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}