{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M11F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M11F2100","canonicalUrl":"https://aoctrl.com/schneider/SH31003M11F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M11F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31003M11F2100 SH3 series servo motor with brake, three-phase, 1500 W continuous power, absolute single-turn SinCos Hiperface encoder, IP65, 100 mm flange.","salesMarkdown":"## Motor sizing and voltage-dependent performance The SH31003M11F2100: This SH3 series servo motor delivers 1500 W continuous power with nominal torque that shifts with the supply: 7.8 N.m at 115 V single phase, 7.5 N.m at 230 V single phase, 7.0 N.m at 400 V three phase, and 6.76 N.m at 480 V three phase. The nominal speed also follows the voltage — 500 rpm at 115 V, 1000 rpm at 230 V, 2000 rpm at 400 V, and 2400 rpm at 480 V three phase. Peak stall torque reaches 28.3 N.m across the 115–480 V three-phase range, with a maximum current Irms of 14.7 A — that's the ceiling the drive must supply for short-duration acceleration or deceleration events. ## Encoder feedback and holding brake for vertical loads The absolute single-turn SinCos Hiperface encoder eliminates the need for a homing cycle on power-up — the position is known immediately, which saves time on multi-axis lines where each axis would otherwise need to find its reference. ## Environmental sealing and mechanical interface IP65 protection on both the motor body and the shaft bushing per IEC 60034-5 means this motor withstands washdown environments — food processing, beverage lines, or any area where hosed cleaning is routine. Natural convection cooling keeps the design simple with no fan to clog or fail. The 100 mm international standard flange (3.9 in) with a 19 mm shaft diameter and parallel key accepts standard couplings and pulleys. Maximum radial force at the shaft is 1050 N at 1000 rpm, derating to 660 N at 4000 rpm — check the application's belt or gear load against these limits.","metaTitle":"Schneider Electric SH31003M11F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003M11F2100 servo motor with brake, 1500 W continuous power, absolute single-turn SinCos Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0cc7305958f007ed3173f5e08eef5dee.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31003M11F2100/sh3-servomotor-100mm-3-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M11F2100/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH31003M11F2100 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder, which provides position feedback without requiring a homing cycle on power-up."},{"question":"What is the holding brake torque on this servo motor?","answer":"The holding brake delivers 9 N.m (79.7 lbf.in) of holding torque, suitable for securing vertical loads when power is removed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M11F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M11F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}