{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M12F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M12F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31003M12F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M12F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, 1500 W continuous power, 100 mm flange, three-phase, IP65, absolute multiturn SinCos Hiperface encoder, natural convection cooling.","salesMarkdown":"The SH31003M12F2200 is a 1500 W continuous-power servo motor with an integrated holding brake — the brake holds 79.7 lbf.in (9 N.m) when the drive is off, so vertical-axis loads stay put without a separate mechanical lock. Nominal torque and speed both shift with the supply voltage: at 400 V three-phase you get 62.0 lbf.in (7 N.m) at 2000 rpm; at 480 V three-phase it's 59.83 lbf.in (6.76 N.m) at 2400 rpm. The motor delivers peak stall torque of 250.5 lbf.in (28.3 N.m) across the 115...480 V three-phase range — that's the torque available for acceleration or overcoming a jam. The absolute multiturn SinCos Hiperface encoder means the drive knows the shaft position on power-up — no homing cycle needed after a power loss. That saves time on multi-axis machines where every axis would otherwise have to find its reference. ## Mounting and integration — flange, shaft, and connector The motor uses an international standard flange with a 3.9 in (100 mm) bolt circle and 0.4 in (9.0 mm) mounting holes — fits the common 100 mm frame pattern. The shaft is 0.7 in (19 mm) diameter with a parallel key, 1.6 in (40 mm) long. The electrical connection is a rotatable right-angled connector — you can orient the cable exit in four directions to fit tight cable-tray routing without adding a separate right-angle adapter. IP65 on the motor body and shaft bushing, IP67 on the housing — that's washdown-rated for food-and-bev or wet machining lines. Natural convection cooling means no fan to clog or fail, but the thermal budget depends on free air movement around the finned housing. Sourced through independent distribution channels against an RFQ.","metaTitle":"Schneider Electric SH31003M12F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003M12F2200 SH3 servo motor with holding brake. 1500 W continuous power, 100 mm flange, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/045412356eb143d568aea8ec3e2dc460.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH31003M12F2200/sh3-servomotor-100mm-3-stacks-high-torque-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M12F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the SH31003M12F2200's phase and power rating?","answer":"It is a three-phase servo motor with 1500 W continuous power. Nominal torque and speed vary with the supply voltage — see the spec table for the full voltage-dependent curves."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M12F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M12F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}