{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P01A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P01A1200","canonicalUrl":"https://aoctrl.com/schneider/SH31003P01A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P01A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31003P01A1200, 2400 W continuous power, 100 mm flange, smooth shaft, absolute single-turn SinCos Hiperface encoder, IP65/IP67, natural convection cooling.","salesMarkdown":"## Active production — 2400 W continuous, 100 mm flange The SH31003P01A1200: Rated for 2400 W continuous power, this motor delivers nominal torque ranging from 5.1 N.m at 480 V three-phase up to 7.5 N.m at 115 V single-phase, with nominal speeds spanning 1000 rpm at 115 V to 4800 rpm at 480 V. The 100 mm international standard flange (3.9 in) and 19 mm smooth shaft with 40 mm shaft length define the mechanical interface — it bolts directly to standard NEMA or IEC mounting patterns. ## Torque delivery across the speed range Continuous stall torque sits at 8 N.m (70.8 lbf.in) across the 115...480 V three-phase input range, with a continuous stall current of 6.6 A. Peak stall torque reaches 28.3 N.m (250.5 lbf.in) — that's a 3.5x overload capability for acceleration and deceleration phases, limited to 3 seconds peak at 28.3 A. The torque constant is 1.22 N.m/A at 120 °C copper temperature, and the back EMF constant is 77 V/krpm at 20 °C. These two parameters let the drive calculate the motor's electrical behavior — the stator inductance of 4.7 mH and resistance of 1.43 Ohm define the electrical time constant and winding losses for servo loop tuning. ## Encoder, cooling, and environmental sealing The absolute single-turn SinCos Hiperface encoder provides position feedback without needing a homing sequence on power-up — the drive reads the absolute position within one revolution. This saves a home-switch input and a homing routine on every power cycle, which matters on multi-axis machines where lost position on a power bump means re-referencing the whole line. Cooling is natural convection — no fan, no forced air, no coolant lines. That means the 2400 W rating assumes free air circulation around the motor body; mounting it in a tight enclosure or against a heat sink changes the thermal budget. The IP65 rating on the motor body and shaft bushing, plus IP67 on the housing per IEC 60034-5, means it handles washdown environments — food processing, packaging lines, outdoor conveyors — without condensation ingress. Electrical connection is via a straight connector — no right-angle plug to fight with in tight cable trays. The 4-pole rotor design keeps the motor length compact at 240.5 mm (9.5 in) for the power class. ## Sourcing — active, quoted to order The sizing reference is SH31003P, which ties to Schneider's motion sizing tools — if you're replacing a motor in an existing machine, the same sizing reference means the drive tuning parameters should carry over.","metaTitle":"Schneider Electric SH31003P01A1200 Servo Motor, 2400 W","metaDescription":"Schneider Electric SH31003P01A1200 servo motor, 2400 W continuous power, 100 mm flange, IP65/IP67, absolute encoder. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P01A1200","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 3.22 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 3 stacks, smooth Shaft, SinCos Singleturn 128, no Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"1000 rpm 115 V single phase 2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"45.1 lbf.in (5.1 N.m) 480 V three phase 66.4 lbf.in (7.5 N.m) 115 V single phase 62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"4.7 mH","Stator resistance":"1.43 Ohm","Maximum current Irms":"28.3 A","Nominal output power":"790 W 115 V single phase 1470 W 230 V single phase 2390 W 400 V three phase 2560 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a9a2db72ccb6806154caca961381592b.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31003P01A1200/sh3-servomotor-100mm-3-stacks-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH31003P01A1200?","answer":"No stock-holding claim is made here — availability is verified per request."},{"question":"What is SH31003P01A1200's listed phase and power ratings?","answer":"It's a three-phase motor. Continuous power is 2400 W. Nominal output power varies by supply: 790 W at 115 V single-phase, 1470 W at 230 V single-phase, 2390 W at 400 V three-phase, and 2560 W at 480 V three-phase. Nominal torque ranges from 5.1 N.m at 480 V to 7.5 N.m at 115 V."},{"question":"What is the shaft size and mounting flange on SH31003P01A1200?","answer":"The motor flange size is 100 mm (3.9 in) with an international standard flange mounting. Shaft diameter is 19 mm (0.7 in), shaft length is 40 mm (1.6 in), and the shaft end is smooth — no keyway. Centring collar diameter is 95 mm (3.7 in) with a 3.5 mm depth."},{"question":"What IP rating and encoder type does SH31003P01A1200 have?","answer":"IP65 on the motor body and shaft bushing, IP67 on the housing, per IEC 60034-5. The encoder is an absolute single-turn SinCos Hiperface type — no homing sequence needed on power-up for position within one revolution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P01A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P01A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}