{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P01F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P01F2100","canonicalUrl":"https://aoctrl.com/schneider/SH31003P01F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P01F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH31003P01F2100 servo motor with holding brake, 100 mm flange, 2400 W continuous power, IP65, absolute single-turn SinCos Hiperface encoder, smooth shaft.","salesMarkdown":"The SH31003P01F2100 is a 2400 W continuous-power servo motor from the SH3 family, built with an integrated holding brake rated 9 N.m (79.7 lbf.in). That brake holds the load at standstill without power to the motor windings — critical for vertical-axis applications where the load drops when the drive is disabled. It carries an absolute single-turn SinCos Hiperface encoder, which reports position at power-up without a homing move. On a machine that cycles through power-downs, this saves the seconds per cycle that a multi-turn or incremental encoder would need to re-reference. The motor is rated IP65 per IEC 60034-5 on both the body and the shaft bushing. ## Torque and speed across supply voltages Nominal torque varies with the supply: 7.5 N.m at 115 V single-phase, 7.0 N.m at 230 V single-phase, 5.7 N.m at 400 V three-phase, and 5.1 N.m at 480 V three-phase. The nominal speed shifts with voltage too — 1000 rpm at 115 V single-phase, 2000 rpm at 230 V single-phase, 4000 rpm at 400 V three-phase, and 4800 rpm at 480 V three-phase. An integrator sizing for a 400 V three-phase line gets 4000 rpm nominal speed and 5.7 N.m continuous torque. Peak stall torque is 28.3 N.m across the 115...480 V three-phase range, and continuous stall torque is 8 N.m over the same range. The 28.3 A peak current and 28.3 A maximum continuous current match — the motor can deliver that peak for 3 seconds, enough for acceleration transients without tripping the drive's current limit. ## Mounting and mechanical interface The motor uses an international standard flange with a 100 mm flange size, a 95 mm centring collar diameter, and a 3.5 mm centring collar depth. Four mounting holes at 9.0 mm diameter secure it to the machine frame. The smooth shaft is 19 mm diameter by 40 mm long. Cooling is by natural convection — no external fan or forced air required. That simplifies installation in confined spaces but means the thermal limit (130 °C copper hot-spot,) governs the duty cycle if the motor runs continuously at peak torque without airflow. Electrical connection is via a straight connector and a rotatable right-angled connector, giving flexibility for cable routing in tight cabinets. The IP65 rating holds at the connector interface when mated with the matching cordset. This part is sourced through independent distribution channels.","metaTitle":"Schneider Electric SH31003P01F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003P01F2100 servo motor with brake, 2400 W continuous power, IP65, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P01F2100","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 3.22 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 3 stacks, smooth Shaft, SinCos Singleturn 128, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1000 rpm 115 V single phase 2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"45.1 lbf.in (5.1 N.m) 480 V three phase 66.4 lbf.in (7.5 N.m) 115 V single phase 62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"4.7 mH","Stator resistance":"1.43 Ohm","Maximum current Irms":"28.3 A","Nominal output power":"790 W 115 V single phase 1470 W 230 V single phase 2390 W 400 V three phase 2560 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0214b87ea596859c9ae238cf272c1f62.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31003P01F2100/sh3-servomotor-100mm-3-stacks-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What encoder type does SH31003P01F2100 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides position feedback at power-up without requiring a homing sequence, saving cycle time on machines that power-cycle between runs."},{"question":"What is the holding brake torque on this servo motor?","answer":"The integrated holding brake is rated 9 N.m (79.7 lbf.in). This holds the load at standstill when the drive is disabled, essential for vertical-axis applications where the load would otherwise drop."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P01F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P01F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}