{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31003P02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P02A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31003P02A2200, 2400 W continuous power, 8 N.m continuous stall torque, three-phase, absolute multiturn SinCos Hiperface encoder, smooth shaft, IP65/IP67.","salesMarkdown":"## Power and torque across the supply range The SH31003P02A2200: This SH3 frame delivers 2400 W continuous power, but the nominal torque and speed shift with the supply voltage — a single motor covers 115 V single-phase through 480 V three-phase installations. At 480 V three-phase you get 5.1 N.m at 4800 rpm; drop to 115 V single-phase and it's 7.5 N.m at 1000 rpm. The continuous stall torque holds at 8 N.m regardless of supply, so the holding torque at zero speed is consistent. ## Encoder and feedback — what the drive needs to see Absolute multiturn SinCos Hiperface encoder — that's a sine-cosine interface with Hiperface protocol, common on Schneider Lexium drives. The drive's feedback card must support Hiperface; a standard incremental encoder input won't read it. Back EMF constant is 77 V/krpm at 20 °C, and torque constant is 1.22 N.m/A at 120 °C hot copper. These two numbers set the drive's current loop gain and the bus voltage headroom needed to reach rated speed under load. ## Mounting and environmental sealing International standard flange, 100 mm square, with a 95 mm centring collar and 9 mm mounting holes. Smooth shaft, 19 mm diameter, 40 mm length — no keyway, so the coupling must clamp or use a set-screw hub. IP65 on the motor body and shaft bushing, IP67 on the housing — that's dust-tight and protected against hose-directed water. The rotatable right-angled connector lets you route the cable in tight enclosures without a right-angle adapter. ## Sourcing and lifecycle — active, quoted to order Sourced through independent distribution against an RFQ.","metaTitle":"Schneider Electric SH31003P02A2200 Servo Motor, 2400 W","metaDescription":"Schneider Electric SH31003P02A2200 SH3 servo motor, 2400 W continuous, 8 N.m stall torque, absolute multiturn encoder, IP65/IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P02A2200","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 3.22 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 3 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"1000 rpm 115 V single phase 2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"45.1 lbf.in (5.1 N.m) 480 V three phase 66.4 lbf.in (7.5 N.m) 115 V single phase 62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"4.7 mH","Stator resistance":"1.43 Ohm","Maximum current Irms":"28.3 A","Nominal output power":"790 W 115 V single phase 1470 W 230 V single phase 2390 W 400 V three phase 2560 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1b06b2ec4afb508d3fd1a07268d45ef7.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31003P02A2200/sh3-servomotor-100mm-3-stacks-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What drive works with the SH31003P02A2200 encoder?","answer":"The absolute multiturn SinCos Hiperface encoder requires a drive with a Hiperface-compatible feedback interface. Schneider's Lexium 28 or Lexium 32 series with the appropriate encoder option card will read it; a generic incremental encoder input will not."},{"question":"Can this motor run on single-phase power?","answer":"Yes — the nominal speed and torque tables include 115 V single-phase and 230 V single-phase entries. At 115 V single-phase it delivers 790 W output at 1000 rpm; at 230 V single-phase it delivers 1470 W at 2000 rpm."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}