{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31003P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31003P02F2200, three-phase, 2400 W continuous power, IP65/IP67, absolute multiturn SinCos Hiperface encoder, smooth shaft, 100 mm flange.","salesMarkdown":"## Nominal speed and torque — voltage-dependent performance The SH31003P02F2200 is a three-phase servo motor with holding brake, part of Schneider Electric's SH3 series. Its nominal speed shifts with the supply: 1000 rpm at 115 V single-phase, 2000 rpm at 230 V single-phase, 4000 rpm at 400 V three-phase, and 4800 rpm at 480 V three-phase. Nominal torque also varies by voltage — 45.1 lbf.in (5.1 N.m) at 480 V three-phase up to 66.4 lbf.in (7.5 N.m) at 115 V single-phase. That means the same motor delivers different output depending on the line voltage you feed it; the 480 V three-phase connection gives the highest speed but the lowest torque, while the 115 V single-phase connection gives the highest torque at lower speed. Continuous power is 2400 W, and the motor uses natural convection cooling. The encoder is an absolute multiturn SinCos Hiperface type — this gives high-resolution position feedback without needing a home cycle on power-up, which saves time on multi-axis machines. ## Environmental sealing and mounting The motor carries IP65 on the body and shaft bushing, and IP67 on the housing — conforming to IEC 60034-5. That means it handles washdown environments directly; the housing seal keeps out high-pressure water jets, while the shaft bushing seal protects the bearing area. The flange size is 100 mm (3.9 in) with an international standard flange, and the centring collar diameter is 95 mm (3.7 in) with a 3.5 mm depth. Mounting holes are 9.0 mm diameter on a standard pattern. The shaft is smooth, 19 mm diameter and 40 mm long. The electrical connection uses a rotatable right-angled connector — this lets you orient the cable exit to fit tight panel layouts without adding a right-angle adapter. ## Stall torque, inertia, and braking Continuous stall torque is 70.8 lbf.in (8 N.m) across the 115–480 V three-phase range. Peak stall torque hits 250.5 lbf.in (28.3 N.m) at the same voltage range — that's about 3.5× the continuous figure, useful for short acceleration bursts. The holding brake delivers 79.7 lbf.in (9 N.m), which holds the load at rest without power to the motor windings.","metaTitle":"Schneider Electric SH31003P02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003P02F2200 servo motor with brake. Three-phase, 2400 W continuous power, IP65/IP67, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P02F2200","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 3.22 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 3 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1000 rpm 115 V single phase 2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"45.1 lbf.in (5.1 N.m) 480 V three phase 66.4 lbf.in (7.5 N.m) 115 V single phase 62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"4.7 mH","Stator resistance":"1.43 Ohm","Maximum current Irms":"28.3 A","Nominal output power":"790 W 115 V single phase 1470 W 230 V single phase 2390 W 400 V three phase 2560 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,603.34","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/81b34404700f11aa38183fad4a8ac7f6.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH31003P02F2200/sh3-servomotor-100mm-3-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is the nominal speed of SH31003P02F2200 at 480 V three-phase?","answer":"At 480 V three-phase, the nominal speed is 4800 rpm. At 400 V three-phase it is 4000 rpm, at 230 V single-phase 2000 rpm, and at 115 V single-phase 1000 rpm."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}