{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P0BA4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P0BA4000","canonicalUrl":"https://aoctrl.com/schneider/SH31003P0BA4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P0BA4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31003P0BA4000, 2400 W continuous power, 4000 rpm at 400 V three-phase, IP65, absolute multiturn Hiperface DSL encoder, smooth shaft, without brake, natural convection cooling.","salesMarkdown":"## Motor ratings that shift with supply voltage The SH31003P0BA4000 is a three-phase servo motor whose nominal speed and torque depend on the supply voltage. At 400 V three-phase it delivers 4000 rpm and 5.7 Nm nominal torque; at 480 V three-phase it reaches 4800 rpm with 5.1 Nm; on 230 V single-phase it runs 2000 rpm and 7 Nm. Continuous power is 2400 W, with a continuous stall torque of 8 Nm across the 115–480 V three-phase range. Peak stall torque hits 28.3 Nm, useful for acceleration transients. ## Encoder, feedback, and shaft details Fitted with an absolute multiturn Hiperface DSL encoder — single-cable feedback that carries both power and position data, reducing cabling complexity. The encoder type is a key compatibility point with the drive: confirm the drive supports Hiperface DSL protocol. Smooth shaft, 19 mm diameter, 40 mm shaft length. No holding brake — this variant is for applications where the load holds position without a brake, or where an external brake is used. Electrical connection via a straight connector and a quicklock rotatable right-angled connector — the right-angle option helps in tight cable exit spaces. ## Mounting and environmental sealing Mounts on an international standard flange with a 100 mm flange size and 95 mm centring collar. Four 9 mm mounting holes on the flange face. IP65 protection on the motor body per IEC 60034-5, but the shaft bushing is only IP54 without the shaft seal ring — if washdown is required, fit the optional shaft seal. Overall length is 240.5 mm. Maximum radial force at the shaft is 4500 N at 1000 rpm, derating to 3120 N at 3000 rpm. Maximum axial force is 740 N. The sizing reference SH31003P identifies the frame and winding; confirm the mating drive and cable set before committing.","metaTitle":"Schneider Electric SH31003P0BA4000 Servo Motor, 2400 W","metaDescription":"Schneider Electric SH31003P0BA4000 servo motor, 2400 W continuous, 4000 rpm at 400 V three-phase, IP65, absolute multiturn Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P0BA4000","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 3.22 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 3 stacks, smooth Shaft, Multiturn DSL 18bit, no Brake, OneMotorCable angular M23, IP54/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"4.7 mH","Stator resistance":"1.43 Ohm","Maximum current Irms":"28.3 A","Nominal output power":"1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"740 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"3120 N 3000 rpm 4500 N 1000 rpm 3570 N 2000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,947.24","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3f31aa9322ece6fe5663f18bb8966f90.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31003P0BA4000/sh3-servomotor-100mm-3-stacks-smooth-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip54-65/"},"ai":{"faq":[{"question":"What is the closest alternative to SH31003P0BA4000 in the SH3 family?","answer":"The SH31003P sizing reference identifies the frame; any substitution would require checking the winding, encoder type, and brake option against the application."},{"question":"What compliance documentation does Schneider provide for SH31003P0BA4000?","answer":"The motor carries IP65 per IEC 60034-5."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P0BA4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P0BA4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}