{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P0BA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P0BA4100","canonicalUrl":"https://aoctrl.com/schneider/SH31003P0BA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P0BA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31003P0BA4100, 2400 W continuous power, 4000 rpm at 400 V three-phase, 7 N·m nominal torque at 230 V, IP65, absolute multiturn Hiperface DSL encoder, smooth shaft.","salesMarkdown":"## Supply-dependent speed and torque — the real selection gate The SH31003P0BA4100: This SH3 servo motor delivers 2000 rpm at 230 V single-phase input, 4000 rpm at 400 V three-phase, and 4800 rpm at 480 V three-phase — the speed ceiling is set by the supply voltage, not the motor itself. Nominal torque follows the same supply split: 7 N·m at 230 V single-phase, 5.7 N·m at 400 V three-phase, and 5.1 N·m at 480 V three-phase. The 2400 W continuous power rating holds across the three-phase configurations. Peak stall torque reaches 28.3 N·m on a 115...480 V three-phase supply — this is the short-duration overload ceiling for acceleration or emergency stop events. ## Encoder and feedback — absolute multiturn Hiperface DSL The absolute multiturn Hiperface DSL encoder provides position feedback over a single cable pair, combining power and data — no separate encoder cable needed. This simplifies the cable chain and reduces wiring faults on the line. The rotatable right-angled connector with quicklock allows the cable exit to be oriented in the field, useful when the motor is mounted in tight spaces or against a machine frame. ## IP65 and thermal — sealed for wet environments Cooling is natural convection (no fan), so the motor relies on its own surface area and the machine frame for heat dissipation. The copper hot-spot temperature is rated to 130 °C. Stator resistance is 1.43 Ohm and inductance is 4.7 mH — these values matter for the drive's current-loop tuning and for estimating I²R losses at the continuous stall current of 6.6 A. ## Mounting and mechanical interface The motor uses an international standard flange with a 100 mm flange size and a 95 mm centring collar diameter — this is a common B5 / FF100 pattern, so it bolts directly to standard gearboxes and machine frames without adaptor plates. The smooth shaft is 19 mm diameter and 40 mm long, with a centring collar depth of 3.5 mm. Maximum radial force at the shaft is 130 N at 1000 rpm, derating to 90 N at 3000 rpm; axial force is limited to 20 N. ## Sourcing and lifecycle — current production, quoted to order The motor ships as a single unit (1 per package).","metaTitle":"Schneider Electric SH31003P0BA4100 Servo Motor, 2400 W","metaDescription":"Schneider Electric SH31003P0BA4100 SH3 servo motor, 2400 W continuous, 4000 rpm at 400 V three-phase, IP65, absolute multiturn Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P0BA4100","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 3.22 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 3 stacks, smooth Shaft, Multiturn DSL 18bit, no Brake, OneMotorCable angular M23, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"4.7 mH","Stator resistance":"1.43 Ohm","Maximum current Irms":"28.3 A","Nominal output power":"1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"20 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"130 N 1000 rpm 105 N 2000 rpm 90 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,118.42","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a4d4aab0d438648a6d1782a162901a34.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31003P0BA4100/sh3-servomotor-100mm-3-stacks-smooth-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip65-65/"},"ai":{"faq":[{"question":"What supply voltage and speed does the SH31003P0BA4100 need?","answer":"The motor runs at 2000 rpm on 230 V single-phase, 4000 rpm on 400 V three-phase, and 4800 rpm on 480 V three-phase. The three-phase input delivers the full 2400 W continuous power."},{"question":"What encoder type does this motor use?","answer":"It uses an absolute multiturn Hiperface DSL encoder, which combines power and feedback over a single cable pair — no separate encoder cable is required."},{"question":"What is the IP rating of the SH31003P0BA4100?","answer":"Both the motor body and the shaft bushing are rated IP65 per IEC 60034-5, making it suitable for washdown environments with hose-directed water and dust ingress."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P0BA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P0BA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}