{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P0BF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P0BF3000","canonicalUrl":"https://aoctrl.com/schneider/SH31003P0BF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P0BF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31003P0BF3000, three-phase, 2400 W continuous power, 7 Nm nominal torque at 400 V, absolute multiturn Hiperface DSL encoder, IP65, smooth shaft.","salesMarkdown":"## 2400 W continuous, 28.3 Nm peak — torque across the speed range The SH31003P0BF3000 is a 2400 W continuous-power servo motor from the SH3 series, built for three-phase supplies. Its nominal torque lands at 7 Nm on 400 V three-phase, 5.7 Nm at 400 V, and 5.1 Nm at 480 V — the torque curve shifts with the line voltage, so the drive tuning must match the actual supply. ## Absolute multiturn Hiperface DSL — one cable for power and feedback The encoder is an absolute multiturn Hiperface DSL, which multiplexes position data and power over a single pair — no separate feedback cable. This simplifies the cable chain on a moving axis and reduces the number of connector pins at the drive end. The rotatable right-angle connector and the straight quicklock connector give two wiring options for tight cabinet layouts. The motor mounts on an international standard flange with a 100 mm flange size and a 95 mm centring collar. The smooth shaft (19 mm diameter, 40 mm length) accepts a keyless clamp-type coupling — no keyway, so the shaft is balanced for higher speeds. Maximum radial force at 2000 rpm is 3570 N; axial force limit is 740 N. Stay within those bearing loads when sizing the belt or coupling. ## IP65 motor body, natural convection — no fan noise The shaft bushing without the shaft seal ring drops to IP54, so if the application sees direct spray on the shaft exit, specify the optional seal ring. Cooling is natural convection — no external fan, so the motor runs silently and cannot ingest debris, but the continuous torque must be derated if the ambient exceeds the 130 °C copper hot-spot limit. Stator resistance is 1.43 Ω and inductance is 9.4 mH — these values set the electrical time constant and influence the current-loop tuning gains on the servo drive. The torque constant is 1.22 Nm/A at 120 °C; the back EMF constant is 77 V/krpm at 20 °C. Use the hot torque constant for sizing the continuous current, and the cold back EMF for the bus voltage headroom at top speed.","metaTitle":"Schneider Electric SH31003P0BF3000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003P0BF3000 servo motor with brake. Three-phase, 2400 W continuous power, absolute multiturn Hiperface DSL encoder. IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.7 in (271.5 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"9.4 mH","Stator resistance":"1.43 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"28.3 A","Nominal output power":"1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"740 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0e510716e14e8d23dd97c4a5beffc10b.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31003P0BF3000/sh3-omc-motor-100mm-3-st-ip65-54-smooth-sh-dsl-multi-turn-str-conn-m23-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003P0BF3000/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of SH31003P0BF3000 at 400 V three-phase?","answer":"At 400 V three-phase the nominal torque is 5.7 Nm (50.4 lbf·in). At 230 V single-phase it is 7 Nm (62.0 lbf·in), and at 480 V three-phase it is 5.1 Nm (45.1 lbf·in)."},{"question":"What encoder type does SH31003P0BF3000 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder. This is a single-cable feedback protocol that carries both position data and power over one pair, reducing cabling complexity."},{"question":"What is the IP rating of SH31003P0BF3000?","answer":"The motor body is rated IP65 per IEC 60034-5. The shaft bushing without the shaft seal ring is IP54 — if the application requires full IP65 at the shaft exit, the optional seal ring must be fitted."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P0BF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P0BF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}