{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P0BF3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P0BF3100","canonicalUrl":"https://aoctrl.com/schneider/SH31003P0BF3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P0BF3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31003P0BF3100 SH3 series servo motor with brake, 100 mm flange, smooth shaft 19 mm diameter, 2400 W continuous power, 28.3 A max current, IP65, absolute multiturn Hiperface DSL encoder, three-phase.","salesMarkdown":"## Motor frame and mechanical fit The SH31003P0BF3100 carries a 100 mm international standard flange and an overall length of 271.5 mm. The smooth shaft measures 19 mm diameter by 40 mm long, with a centring collar 95 mm diameter and 3.5 mm deep. Mounting holes are 9.0 mm diameter on the flange face. Rated IP65 for both the motor body and the shaft bushing per IEC 60034-5 — the seal at the shaft exit is the wet-end barrier, not just the housing. Natural convection cooling means no fan; the thermal budget depends on the mounting surface and ambient airflow. ## Speed-torque envelope and supply voltage Nominal speed depends on the supply: 2000 rpm at 230 V single-phase, 4000 rpm at 400 V three-phase, 4800 rpm at 480 V three-phase. The nominal torque follows the same pattern — 7 N.m at 230 V, 5.7 N.m at 400 V, 5.1 N.m at 480 V. Peak stall torque is 28.3 N.m across the 115-480 V three-phase range, and continuous stall torque is 8 N.m. ## Encoder, brake, and electrical interface The absolute multiturn Hiperface DSL encoder carries position and commutation data on a single cable pair — no separate battery backup for multiturn count. The holding brake delivers 9 N.m static torque and pulls in at 18 W. The electrical connection uses a quicklock straight connector, which mates without tools and provides IP65 at the joint when paired with the matching cable. Stator resistance is 1.43 Ohm and inductance is 9.4 mH. The torque constant is 1.22 N.m/A at 120°C copper temperature, and the back EMF constant is 77 V/krpm at 20°C. Maximum continuous current Irms is 28.3 A; continuous stall current is 6.6 A. These values feed the drive's autotune routine — the stator resistance and inductance set the current regulator gains.","metaTitle":"Schneider Electric SH31003P0BF3100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003P0BF3100 servo motor with brake, 100 mm flange, 2400 W continuous power, 28.3 N.m peak torque, IP65, Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.7 in (271.5 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"9.4 mH","Stator resistance":"1.43 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"28.3 A","Nominal output power":"1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"20 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"105 N 2000 rpm 90 N 3000 rpm 130 N 1000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/16a2a25483ca45555a139b6a7ece8338.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31003P0BF3100/sh3-servomotor-100mm-3-stacks-smooth-shaft-multiturn-dsl-18bit-brake-onemotorcable-straight-m23-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003P0BF3100/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH31003P0BF3100 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder, which communicates position and commutation data over a single cable pair without a separate battery for multiturn tracking."},{"question":"What is the holding torque of the brake on SH31003P0BF3100?","answer":"The holding brake delivers 9 N.m static torque and requires 18 W pull-in power."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P0BF3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P0BF3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}