{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P11F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P11F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31003P11F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P11F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31003P11F1200 SH3 servo motor with holding brake, 2400 W continuous power, 9 N.m holding torque, IP65, absolute single-turn SinCos Hiperface encoder, 100 mm flange.","salesMarkdown":"## Speed and torque across the supply range The SH31003P11F1200 delivers nominal speeds from 1000 rpm on 115 V single-phase up to 4800 rpm on 480 V three-phase, with nominal torque ranging from 5.1 N.m at 480 V three-phase to 7.5 N.m at 115 V single-phase. Peak stall torque reaches 28.3 N.m across the 115...480 V three-phase range, backed by a holding brake rated at 9 N.m that locks the shaft when power is removed. ## Encoder and feedback for position loops An absolute single-turn SinCos Hiperface encoder provides position feedback without a homing cycle on power-up — the rotor position is known immediately, which cuts commissioning time on multi-axis lines where each axis must reference the same home. ## Environmental sealing and mounting IP65 protection on the motor body and shaft bushing, plus IP67 on the housing, means the SH31003P11F1200 withstands washdown environments — the shaft seal and housing gasket keep coolant and fines out of the winding and bearing cavity. The 100 mm international standard flange with 9 mm mounting holes and a 3.5 mm centring collar depth bolts directly to standard gearbox or machine frames without adapter plates. Listed as current production — the SH31003P11F1200 is an active catalog item, not a legacy or discontinued part. The straight connector and parallel key shaft end match the standard SH31003P sizing reference.","metaTitle":"Schneider Electric SH31003P11F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003P11F1200 SH3 servo motor with holding brake. 2400 W continuous power, 9 N.m holding torque, IP65, absolute single-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P11F1200","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 3.22 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1000 rpm 115 V single phase 2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"45.1 lbf.in (5.1 N.m) 480 V three phase 66.4 lbf.in (7.5 N.m) 115 V single phase 62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"4.7 mH","Stator resistance":"1.43 Ohm","Maximum current Irms":"28.3 A","Nominal output power":"790 W 115 V single phase 1470 W 230 V single phase 2390 W 400 V three phase 2560 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2f2bb12d853f287914ffa24de3f96e03.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31003P11F1200/sh3-servomotor-100mm-3-stacks-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is the holding torque of the SH31003P11F1200 brake?","answer":"The holding brake delivers 9 N.m (79.7 lbf.in) of holding torque, which locks the rotor when the drive is de-energized and prevents the load from drifting in a vertical axis or during a power loss."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P11F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P11F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}