{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P12A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P12A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31003P12A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P12A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31003P12A2200, three-phase, 2400 W continuous power, 8 Nm continuous stall torque, 4000 rpm, IP65, absolute multiturn SinCos Hiperface encoder, international standard flange.","salesMarkdown":"## Speed and torque across the voltage range The SH31003P12A2200 delivers nominal speed that depends on the supply: 1000 rpm on 115 V single-phase, 2000 rpm on 230 V single-phase, 4000 rpm on 400 V three-phase, and 4800 rpm on 480 V three-phase. Nominal torque also shifts with voltage — 5.1 Nm at 480 V three-phase, 7.5 Nm at 115 V single-phase, 7 Nm at 230 V single-phase, and 5.7 Nm at 400 V three-phase. The continuous stall torque is 8 Nm across the 115–480 V three-phase range, and peak stall torque reaches 28.3 Nm across the same voltage band. ## Encoder, cooling, and mechanical interface The motor uses an absolute multiturn SinCos Hiperface encoder, which gives position feedback without a home cycle after power loss — useful for applications that must resume from a known position. Cooling is by natural convection, so no external fan or coolant circuit is needed. The motor flange size is 100 mm (3.9 in) with an international standard flange, and the shaft has a parallel key with a 19 mm diameter and 40 mm length. ## Environmental and mechanical limits IP65 rating on the motor and shaft bushing, IP67 on the housing — the motor withstands washdown environments, though the connector is a rotatable right-angled type that must be properly seated to maintain the seal. Maximum radial force is 1050 N at 1000 rpm, dropping to 660 N at 4000 rpm; maximum axial force is 160 N. These limits govern bearing life in direct-drive or belt-driven setups. ## Electrical parameters for drive tuning Stator resistance is 1.43 Ohm and stator inductance is 4.7 mH — these set the electrical time constant and influence current-loop tuning in the servo drive. The torque constant is 1.22 Nm/A at 120 °C copper temperature, and the back-EMF constant is 77 V/krpm at 20 °C. Maximum continuous current is 28.3 A, matching the peak 3-second output current of 28.3 A.","metaTitle":"Schneider Electric SH31003P12A2200 Servo Motor, 4000 rpm","metaDescription":"Schneider Electric SH31003P12A2200 servo motor with brake, 2400 W continuous power, 8 Nm continuous stall torque, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P12A2200","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 3.22 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 3 stacks, keyed Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"1000 rpm 115 V single phase 2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"45.1 lbf.in (5.1 N.m) 480 V three phase 66.4 lbf.in (7.5 N.m) 115 V single phase 62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"4.7 mH","Stator resistance":"1.43 Ohm","Maximum current Irms":"28.3 A","Nominal output power":"790 W 115 V single phase 1470 W 230 V single phase 2390 W 400 V three phase 2560 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,343.06","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fc8a3466488e86cdc72be4377f39d680.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31003P12A2200/sh3-servomotor-100mm-3-stacks-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is SH31003P12A2200's listed phase and length?","answer":"The motor is a three-phase design. Its overall length is 9.5 in (240.5 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P12A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P12A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}