{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P1AA3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P1AA3100","canonicalUrl":"https://aoctrl.com/schneider/SH31003P1AA3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P1AA3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31003P1AA3100, 2400 W continuous power, 7 Nm nominal torque at 230 V single-phase, 100 mm flange, IP65, absolute single-turn Hiperface DSL encoder, without holding brake.","salesMarkdown":"## Motor ratings and supply voltage dependency The SH31003P1AA3100: This SH3-series servo motor delivers 2400 W continuous power, but the nominal torque and speed depend on the supply voltage. At 230 V single-phase, it produces 7 Nm at 2000 rpm; on 400 V three-phase, 5.7 Nm at 4000 rpm; on 480 V three-phase, 5.1 Nm at 4800 rpm. The peak stall torque reaches 28.3 Nm across the 115-480 V three-phase range — that's the overload ceiling for acceleration and emergency stops. The continuous stall torque is 8 Nm at 115-480 V three-phase, with a continuous stall current of 6.6 A. Maximum current Irms is 28.3 A — the drive must be sized to supply this peak without tripping. ## Encoder feedback and wiring connections Feedback comes from an absolute single-turn Hiperface DSL encoder — this is a digital serial protocol over a single cable pair, carrying position and temperature data back to the drive. No separate encoder cable needed; the DSL interface simplifies the wiring harness and reduces panel clutter. The motor has two connection options: a rotatable right-angle connector and a quicklock straight connector. Both are pre-wired from the factory; the rotatable version lets you orient the cable exit to match the cable tray or drag chain path without adding a junction box. ## Mounting, shaft, and environmental protection The motor mounts on an international standard flange with a 100 mm flange size and 95 mm centring collar. Four mounting holes at 9.0 mm diameter on a 3.7 in (95 mm) centring collar diameter — fits standard NEMA or IEC machine frames without adapter plates. Shaft is 19 mm diameter with a parallel key, 40 mm shaft length, and 6 mm key width. The shaft end is keyed for positive torque transmission — no keyless locking ring. Maximum radial force is 4200 N at 1000 rpm, derating to 2910 N at 3000 rpm; maximum axial force is 740 N. No holding brake is fitted; if the application requires a brake to hold the load at standstill, it must be ordered separately or added externally. ## Electrical parameters and thermal limits Stator resistance is 1.43 Ohm, inductance 9.4 mH — these set the electrical time constant and influence the drive's current-loop tuning. The torque constant is 1.22 Nm/A at 120 °C copper temperature; the back EMF constant is 77 V/krpm at 20 °C. Four-pole motor design (number of motor poles: 4).","metaTitle":"Schneider Electric SH31003P1AA3100 Servo Motor, 2400 W, 7 Nm","metaDescription":"Schneider Electric SH31003P1AA3100 servo motor, 2400 W continuous power, 7 Nm nominal torque at 230 V single-phase, IP65, absolute single-turn Hiperface DSL","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P1AA3100","Length":"9.5 in (240.5 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 3 stacks, keyed Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable straight M23, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"9.4 mH","Stator resistance":"1.43 Ohm","Maximum current Irms":"28.3 A","Nominal output power":"1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"740 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"2910 N 3000 rpm 4200 N 1000 rpm 3330 N 2000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8267884129e090f5497f29c970dde53a.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31003P1AA3100/sh3-servomotor-100mm-3-stacks-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip65-65/"},"ai":{"faq":[{"question":"What is SH31003P1AA3100's phase requirement?","answer":"It is a three-phase motor, but it can also run on single-phase 230 V with reduced torque and speed. Nominal torque at 230 V single-phase is 7 Nm at 2000 rpm; at 400 V three-phase it delivers 5.7 Nm at 4000 rpm."},{"question":"Does SH31003P1AA3100 include a holding brake?","answer":"No, this variant ships without a holding brake. If the application requires a brake to hold the load at standstill, it must be ordered as a separate option or added externally."},{"question":"What encoder type does SH31003P1AA3100 use?","answer":"It uses an absolute single-turn Hiperface DSL encoder — a digital serial protocol over a single cable pair that carries position and temperature data. This simplifies wiring compared to traditional multi-wire encoder cables."},{"question":"What is the IP rating of SH31003P1AA3100?","answer":"IP65 on both the motor body and the shaft bushing, per IEC 60034-5. It withstands hose-directed water and dust ingress, making it suitable for washdown environments in food processing or packaging lines."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P1AA3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P1AA3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}