{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P1BA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P1BA4100","canonicalUrl":"https://aoctrl.com/schneider/SH31003P1BA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P1BA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31003P1BA4100, 2400 W continuous power, 2000-4800 rpm speed range, 7 Nm nominal torque, IP65, absolute multiturn Hiperface DSL encoder, without holding brake.","salesMarkdown":"## Speed-torque-power at three supply voltages — the drive-matching decision The SH31003P1BA4100: This motor delivers three distinct operating points depending on the supply voltage: 2000 rpm / 7 Nm / 1470 W on 230 V single-phase, 4000 rpm / 5.7 Nm / 2390 W on 400 V three-phase, and 4800 rpm / 5.1 Nm / 2390 W on 480 V three-phase. The 2400 W continuous power rating sets the thermal limit for sustained duty; the peak stall torque of 28.3 Nm provides a 3.5× overload margin over the 8 Nm continuous stall torque for high-inertia starts or transient loads. ## Hiperface DSL encoder — no homing routine at startup The absolute multiturn Hiperface DSL encoder eliminates the need for a homing sequence on power-up; the motor knows its absolute position within a revolution and across multiple turns as soon as the drive communication link is established. This saves commissioning time on multi-axis machines where each axis would otherwise need to find its reference mark before the sequence can run. The rotatable right-angled connector lets the cable exit point be adjusted in the field, which simplifies routing in tight cabinets or along moving cable tracks without needing a different motor variant. ## IP65 and flange mounting — washdown-ready for wet environments Mounting uses the international standard flange with a 100 mm flange size and 95 mm centering collar, so it fits standard European and NEMA-style gearbox interfaces without adapters. The shaft is 19 mm diameter with a parallel key, 40 mm shaft length, and 6 mm key width — a common metric interface that matches many planetary gearboxes and couplings. ## No holding brake — plan for vertical-axis or power-off hold This variant ships without a holding brake, so any application requiring the motor to hold position when power is removed — vertical lifting axes, gravity-loaded conveyors, or tool-change spindles — must add an external brake or select a braked variant of the SH3 series. The absence of a brake also means zero additional rotor inertia from brake components, which keeps acceleration rates high for pick-and-place or indexing applications.","metaTitle":"Schneider Electric SH31003P1BA4100 Servo Motor, 2400 W","metaDescription":"Schneider Electric SH31003P1BA4100 servo motor, 2400 W continuous power, 2000-4800 rpm speed range, 7 Nm nominal torque, IP65, with Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P1BA4100","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 3 stacks, keyed Shaft, Multiturn DSL 18bit, no Brake, OneMotorCable angular M23, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"9.4 mH","Stator resistance":"1.43 Ohm","Maximum current Irms":"28.3 A","Nominal output power":"1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"20 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"90 N 3000 rpm 130 N 1000 rpm 105 N 2000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,170.80","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/528b273e4147687173685192fe1eb376.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31003P1BA4100/sh3-servomotor-100mm-3-stacks-keyed-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip65-65/"},"ai":{"faq":[{"question":"What supply voltages does the SH31003P1BA4100 run on?","answer":"It operates on 230 V single-phase, 400 V three-phase, or 480 V three-phase. The speed, torque, and power output change with each supply voltage — see the spec table for the exact values at each voltage."},{"question":"Does this motor include a holding brake?","answer":"No, this variant ships without a holding brake. For vertical-axis or power-off hold applications, you will need an external brake or a braked variant of the SH3 series."},{"question":"What encoder type does the SH31003P1BA4100 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder, which provides position feedback over a single cable without requiring a homing sequence at startup."},{"question":"What is the IP rating of the SH31003P1BA4100?","answer":"The motor body and shaft bushing are both rated IP65 per IEC 60034-5, making it suitable for washdown environments and dusty industrial conditions."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P1BA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P1BA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}