{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P1BF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P1BF3000","canonicalUrl":"https://aoctrl.com/schneider/SH31003P1BF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P1BF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31003P1BF3000, three-phase servo motor with brake, 2400 W continuous power, absolute multiturn Hiperface DSL encoder, IP65, natural convection cooling, international standard flange 100 mm.","salesMarkdown":"## 2400 W three-phase servo with integrated holding brake The SH31003P1BF3000 is a three-phase servo motor from Schneider Electric's SH3 series, delivering 2400 W continuous power with an integrated holding brake. It carries an absolute multiturn Hiperface DSL encoder for position feedback — no homing cycle needed after power loss, which matters on vertical-axis or gantry applications where the load can drift during a power-down. Nominal torque sits at 7 N.m at 230 V single phase, dropping to 5.7 N.m at 400 V three phase and 5.1 N.m at 480 V three phase. The holding brake delivers 9 N.m — enough to secure the load on a stopped vertical axis without the drive holding current. ## Speed and torque across supply voltages Nominal speed shifts with the supply: 2000 rpm on 230 V single phase, 4000 rpm on 400 V three phase, and 4800 rpm on 480 V three phase. Peak stall torque reaches 28.3 N.m across the 115-480 V three-phase range, giving headroom for short-duration overloads during acceleration or load transients. Continuous stall torque is 8 N.m at 115-480 V three phase, with a torque constant of 1.22 N.m/A at 120 °C copper temperature. The back EMF constant is 77 V/krpm at 20 °C — useful for estimating the DC-bus voltage needed to reach a given speed without field weakening. ## Mounting, cooling, and environmental sealing Mounts on an international standard flange with a 100 mm flange size and 95 mm centring collar diameter. The shaft is 19 mm diameter with a parallel key, 40 mm shaft length — fits standard couplings and pulleys in that bore range. Cooling is by natural convection — no external fan or forced air required, which simplifies installation in confined cabinets or clean-room environments where airflow is restricted. The motor body carries IP65 protection per IEC 60034-5; the shaft bushing without seal ring is IP54, so a shaft seal is needed for washdown zones. Electrical connection uses a rotatable right-angled connector and a quicklock straight connector — both are field-rotatable for cable exit orientation. Maximum radial force at 3000 rpm is 3120 N, dropping to 3570 N at 2000 rpm and 4500 N at 1000 rpm; maximum axial force is 740 N.","metaTitle":"Schneider Electric SH31003P1BF3000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003P1BF3000 three-phase servo motor with brake, 2400 W continuous power, absolute multiturn Hiperface DSL encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.7 in (271.5 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"9.4 mH","Stator resistance":"1.43 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"28.3 A","Nominal output power":"1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"740 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"3120 N 3000 rpm 4500 N 1000 rpm 3570 N 2000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a2cfcbf988af447aa7873737ecfb719a.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31003P1BF3000/sh3-omc-motor-100mm-3-st-ip65-54-keyed-sh-dsl-multi-turn-str-conn-m23-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003P1BF3000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH31003P1BF3000 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder. This provides position feedback without a homing routine after power loss, which is critical for vertical-axis or gantry applications where the load position must be known immediately on restart."},{"question":"What is the holding torque of the brake on SH31003P1BF3000?","answer":"The integrated holding brake delivers 9 N.m holding torque with 18 W pull-in power. This secures the load on a stopped vertical axis without requiring the drive to maintain holding current."},{"question":"How can I order SH31003P1BF3000 or check availability?","answer":"The SH31003P1BF3000 is sourced through authorized distribution channels."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P1BF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P1BF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}