{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P1BF3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P1BF3100","canonicalUrl":"https://aoctrl.com/schneider/SH31003P1BF3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P1BF3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31003P1BF3100 SH3 series servo motor with holding brake, three-phase, 2.4 kW continuous power, 2000-4800 rpm, absolute multiturn Hiperface DSL encoder, IP65, 100 mm flange.","salesMarkdown":"## 2.4 kW servo with holding brake and Hiperface DSL feedback The SH31003P1BF3100 is a Schneider Electric SH3 series servo motor rated for 2.4 kW continuous power with a holding brake rated at 9 N·m (79.7 lbf·in). The brake holds the shaft stationary when power is removed — essential for vertical-axis applications where the load must not drift on power loss. Feedback comes from an absolute multiturn Hiperface DSL encoder, which gives position data even after a power cycle — no homing routine needed on restart. The encoder communicates over a single cable pair, reducing wiring complexity compared to incremental encoder setups. ## Speed-torque envelope across supply voltages Nominal speed depends on the supply: 2000 rpm on 230 V single-phase, 4000 rpm on 400 V three-phase, and 4800 rpm on 480 V three-phase. Nominal torque varies accordingly — 7 N·m at 230 V single-phase, 5.7 N·m at 400 V three-phase, and 5.1 N·m at 480 V three-phase. The motor delivers 28.3 N·m peak stall torque across the 115-480 V three-phase range, giving a 3-5x overload margin for acceleration and deceleration transients. Continuous stall torque is 8 N·m at 115-480 V three-phase, and the torque constant is 1.22 N·m/A at 120 °C copper temperature. Stator resistance is 1.43 Ω and inductance is 9.4 mH — these values matter for drive tuning and current-loop bandwidth calculation. ## Mounting and environmental fit The motor uses a 100 mm (3.9 in) international standard flange with a 95 mm centring collar and 9.0 mm mounting holes. Shaft diameter is 19 mm (0.7 in) with a parallel key and 40 mm shaft length. The IP65 rating on both the motor body and shaft bushing means it withstands washdown — suitable for food processing, packaging, or any line where hosed cleaning is routine.","metaTitle":"Schneider SH31003P1BF3100 Servo Motor with Brake, 2.4 kW","metaDescription":"Schneider Electric SH31003P1BF3100 servo motor with holding brake, 2.4 kW continuous power, 2000-4800 rpm, absolute multiturn Hiperface DSL encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P1BF3100","Length":"10.7 in (271.5 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 3 stacks, keyed Shaft, Multiturn DSL 18bit, Brake, OneMotorCable straight M23, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"9.4 mH","Stator resistance":"1.43 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"28.3 A","Nominal output power":"1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"20 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"130 N 1000 rpm 105 N 2000 rpm 90 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b80cf4779369c4591ed091ef4b0f5922.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31003P1BF3100/sh3-servomotor-100mm-3-stacks-keyed-shaft-multiturn-dsl-18bit-brake-onemotorcable-straight-m23-ip65-65/"},"ai":{"faq":[{"question":"What encoder type does the SH31003P1BF3100 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder. This provides absolute position over multiple shaft revolutions without needing a homing cycle after power-up, and communicates over a single cable pair."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P1BF3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P1BF3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}