{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P1BF4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P1BF4000","canonicalUrl":"https://aoctrl.com/schneider/SH31003P1BF4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P1BF4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31003P1BF4000 SH3 servo motor with holding brake, 2.4 kW continuous power, 7 N·m nominal torque at 400 V three-phase, 9 N·m holding brake, absolute multiturn Hiperface DSL encoder, IP65, 100 mm flange, 19 mm shaft.","salesMarkdown":"## Motor performance across supply voltages The SH31003P1BF4000 delivers 7 N·m nominal torque at 400 V three-phase and 5.1 N·m at 480 V three-phase; on single-phase 230 V it drops to 5.7 N·m. Nominal output power is 2390 W on both 400 V and 480 V three-phase supplies, versus 1470 W on 230 V single-phase. The continuous power rating of 2400 W sits close to the three-phase figures — this motor is designed for three-phase servo drives, not single-phase mains. Peak stall torque reaches 28.3 N·m across the 115...480 V three-phase range, with a corresponding peak current of 28.3 A. The drive must be sized for this peak current, not just the 7 N·m continuous torque, to avoid current-limit faults during acceleration or load transients. ## Holding brake and encoder — what they mean for integration The integrated holding brake holds 9 N·m and pulls in at 18 W. This brake holds the load at standstill — it is not a dynamic braking resistor. The drive must supply the brake release voltage; confirm the drive's brake output can handle the 18 W pull-in power and the inductive kickback when releasing. The quicklock rotatable right-angled connector on the motor side mates with a standard Hiperface DSL cable — no special tooling needed for the connector lock. ## Mechanical fit — flange, shaft, and sealing The 100 mm international standard flange (3.9 in) and 19 mm shaft with a 40 mm shaft length and 6 mm keyway match the common IEC servo mounting pattern. The centring collar depth is 3.5 mm — verify the mating pilot bore depth on the gearbox or machine frame. IP65 on the motor body with IP54 at the shaft bushing (without the shaft seal ring). For washdown environments, fit the optional shaft seal ring to bring the bushing to IP65. The straight connector and the quicklock connector are both rated for the motor's IP class when properly seated. ## Lifecycle and sourcing No official successor or direct cross-reference is recorded. The SH3 series (device short name SH3) covers this frame size; the sizing reference SH31003P confirms the motor variant. For a form-fit-function alternative, compare the flange size, shaft diameter, and encoder type against other SH3 order codes.","metaTitle":"Schneider SH31003P1BF4000 Servo Motor with Brake, 2.4 kW","metaDescription":"Schneider Electric SH31003P1BF4000 SH3 servo motor with holding brake, 2.4 kW continuous power, 7 N·m nominal torque at 400 V three-phase, Hiperface DSL","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P1BF4000","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 3 stacks, keyed Shaft, Multiturn DSL 18bit, Brake, OneMotorCable angular M23, IP54/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"9.4 mH","Stator resistance":"1.43 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"28.3 A","Nominal output power":"1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"20 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"130 N 1000 rpm 105 N 2000 rpm 90 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,298.24","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/728176d0ad021764a90590fa8069c13d.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31003P1BF4000/sh3-servomotor-100mm-3-stacks-keyed-shaft-multiturn-dsl-18bit-brake-onemotorcable-angular-m23-ip54-65/"},"ai":{"faq":[{"question":"What is SH31003P1BF4000's nominal torque at 400 V three-phase?","answer":"Nominal torque is 7 N·m at 400 V three-phase, with a nominal output power of 2390 W. At 480 V three-phase the torque drops to 5.1 N·m at the same power."},{"question":"What encoder type does SH31003P1BF4000 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder. This is a digital interface that carries position data and motor temperature over a single cable pair, compatible with Schneider Lexium drives and other drives supporting Hiperface DSL."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P1BF4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P1BF4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}