{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003P1BF4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003P1BF4100","canonicalUrl":"https://aoctrl.com/schneider/SH31003P1BF4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003P1BF4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31003P1BF4100, 2400 W continuous power, 4000 rpm nominal speed at 400 V three-phase, 9 N·m holding brake, IP65, absolute multiturn Hiperface DSL encoder.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH31003P1BF4100: This SH3 frame servo delivers 4000 rpm nominal at 400 V three-phase input, 4800 rpm at 480 V three-phase, and 2000 rpm on 230 V single-phase supply. The nominal torque drops from 7 N·m at 230 V to 5.7 N·m at 400 V and 5.1 N·m at 480 V — the higher bus voltage trades torque for top speed. Continuous output power holds at 2390 W for both 400 V and 480 V three-phase, versus 1470 W on single-phase 230 V. Peak stall torque reaches 28.3 N·m across the 115–480 V three-phase range, with continuous stall torque at 8 N·m. The 3-second peak current limit of 28.3 A matches the maximum continuous Irms rating — the drive must be sized to supply this peak without dropping into current limit during acceleration or reversing moves. ## Holding brake and vertical-axis safety Integrated holding brake rated 9 N·m static torque, pull-in power 18 W. For Z-axis or inclined-axis applications, the brake holds the load at standstill without servo current — critical for safety during power loss or emergency stop. The brake engages when the motor is de-energized; the 18 W coil power must be factored into the control cabinet thermal budget and the DC bus sizing if a brake rectifier is used. ## Absolute feedback and IP65 sealing Absolute multiturn Hiperface DSL encoder — no homing sequence needed after power cycle; the motor knows its shaft position on boot. This saves cycle time on machines that power-cycle between batches. The IP65 rating (per IEC 60034-5) applies to both the motor body and the shaft bushing, making the unit suitable for washdown environments in food, beverage, or packaging lines where hose-directed cleaning is routine. ## Electrical parameters for drive tuning Stator resistance 1.43 Ω, inductance 9.4 mH, 4 poles. Torque constant 1.22 N·m/A at 120 °C copper temperature; back EMF constant 77 V/krpm at 20 °C. These values set the current-loop PI gains and the velocity-loop feed-forward terms in the servo drive. The natural convection cooling limits continuous duty — no external fan, so the mounting orientation and ambient air flow must be verified for sustained operation at rated torque.","metaTitle":"Schneider SH31003P1BF4100 Servo Motor with Brake, 2400 W","metaDescription":"Schneider Electric SH31003P1BF4100 SH3 servo motor with brake, 2400 W continuous, 4000 rpm at 400 V three-phase. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31003P1BF4100","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 3 stacks, keyed Shaft, Multiturn DSL 18bit, Brake, OneMotorCable angular M23, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.22 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2400 W","Mounting Support":"International standard flange","Sizing reference":"SH31003P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"9.4 mH","Stator resistance":"1.43 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"28.3 A","Nominal output power":"1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"20 N","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"105 N 2000 rpm 90 N 3000 rpm 130 N 1000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,471.58","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9d5bef09e90bf73c4b9e9fe27d4ba533.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31003P1BF4100/sh3-servomotor-100mm-3-stacks-keyed-shaft-multiturn-dsl-18bit-brake-onemotorcable-angular-m23-ip65-65/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to SH31003P1BF4100 in this servo motor family?","answer":"No official successor or cross-reference is recorded. The sizing reference SH31003P identifies the motor frame; within the SH3 series, variants differ by encoder type, brake option, and shaft configuration. Confirm the BOM position against the full order code before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003P1BF4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003P1BF4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}