{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31004P01A1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31004P01A1100","canonicalUrl":"https://aoctrl.com/schneider/SH31004P01A1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31004P01A1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31004P01A1100, 2.5 kW continuous power, 100 mm flange, IP65, smooth shaft, absolute single-turn SinCos Hiperface encoder, without brake.","salesMarkdown":"## Motor specs that decide the retrofit fit The SH31004P01A1100 is a 2.5 kW continuous-power servo motor from the SH3 family, built around a 100 mm international standard flange — the same bolt pattern that's been common across European machine-tool and packaging lines for years, so it drops into the old footprint without re-drilling the mounting plate. Rated for three-phase supply, but the nominal speed and torque shift with the line voltage: at 400 V three-phase you get 3000 rpm and 7.9 N·m; at 480 V three-phase it's 3600 rpm and 6.9 N·m. If you're swapping into a machine originally running at a different voltage, the speed-torque curve moves — no need to gut the whole line, but check that the new motor still delivers the load torque at the required speed. The encoder is an absolute single-turn SinCos Hiperface — that's the same feedback protocol used by Schneider's Lexium drives and many third-party servo drives that support Hiperface. It gives position at power-up without a homing move, which saves a cycle on every machine start. IP65 on both the motor body and the shaft bushing per IEC 60034-5 means the motor handles washdown spray from any direction — it's at home on food-and-beverage conveyors, packaging machines, or any line where the hose comes out between shifts. Smooth shaft, 24 mm diameter, 50 mm shaft length — no keyway, so the coupler or pulley clamps onto the shaft. The 160 N maximum axial force and 1070 N radial force at 1000 rpm give the bearing load budget for belt drives or direct coupling. No holding brake on this variant — the load is held by the drive's holding torque or an external brake. If your application needs a fail-safe brake on the motor shaft, this isn't the variant; the brake version carries a different suffix. ## Electrical parameters for drive tuning and sizing Stator resistance is 1.81 Ω, inductance 18.35 mH — these feed into the servo drive's auto-tuning routine for current-loop gains. The torque constant is 1.62 N·m/A at 120 °C copper temperature, so the continuous stall current of 6.2 A produces 10 N·m stall torque. Peak current is 32.3 A for 3 seconds, delivering 40.5 N·m peak stall torque — enough to break away a stuck load or accelerate a high-inertia roller. The back EMF constant is 103 V/krpm at 20 °C, which sets the maximum bus voltage needed to reach rated speed. ## Sourcing status — active, quoted to order No stock-holding claim — quoted per order.","metaTitle":"Schneider Electric SH31004P01A1100 Servo Motor, 2.5 kW, IP65","metaDescription":"Schneider Electric SH31004P01A1100 servo motor, 2.5 kW continuous, IP65, 100 mm flange, absolute single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.9 in (276.5 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"4.22 kg.cm²","Nominal torque":"87.6 lbf.in (9.9 N.m) 115 V single phase 84.08 lbf.in (9.5 N.m) 230 V single phase 69.9 lbf.in (7.9 N.m) 400 V three phase 61.07 lbf.in (6.9 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2500 W","Mounting Support":"International standard flange","Sizing reference":"SH31004P","Back emf constant":"103 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"358.5 lbf.in (40.5 N.m) 115...480 V three phase","Stator inductance":"18.35 mH","Stator resistance":"1.81 Ohm","Maximum current Irms":"32.3 A","Nominal output power":"780 W 115 V single phase 1490 W 230 V single phase 2480 W 400 V three phase 2600 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"32.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"88.5 lbf.in (10 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1070 N 1000 rpm 850 N 2000 rpm 740 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.2 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/baa73ee6027788b9afda92868395de48.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31004P01A1100/sh3-servomotor-100mm-4-stacks-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31004P01A1100/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH31004P01A1100?","answer":"Pricing and availability are confirmed at quote time against your specific BOM quantity. Submit an RFQ through this listing — the sourcing team will respond with current lead time and volume pricing from authorized distribution channels."},{"question":"What is SH31004P01A1100's listed phase and length?","answer":"It is a three-phase servo motor with a body length of 10.9 inches (276.5 mm). The shaft length is 2.0 inches (50 mm) with a 24 mm smooth shaft end."},{"question":"What compliance documentation does Schneider Electric provide for SH31004P01A1100?","answer":"The motor carries an IP65 rating conforming to IEC 60034-5. Standard Schneider documentation includes the CE declaration of conformity and the product data sheet with electrical and mechanical drawings. RoHS and REACH compliance status should be confirmed at RFQ for your specific jurisdiction."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31004P01A1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31004P01A1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}