{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31004P01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31004P01F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31004P01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31004P01F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31004P01F2200, 2500 W continuous power, 3000 rpm at 400 V three-phase, 12 N·m holding brake, absolute single-turn SinCos Hiperface encoder, IP65/IP67, smooth shaft, 100 mm flange.","salesMarkdown":"## Speed and torque depend on the supply voltage — not a fixed-rating motor The SH31004P01F2200 is a three-phase servo motor but its nominal speed and torque shift significantly with the supply voltage. At 115 V single-phase it delivers 750 rpm and 9.9 N·m; at 230 V single-phase, 1500 rpm and 9.5 N·m; at 400 V three-phase, 3000 rpm and 7.9 N·m; at 480 V three-phase, 3600 rpm and 6.9 N·m. The drive must be parameterised for the actual line voltage — the motor does not auto-detect the supply. Continuous power is 2500 W, but the nominal output power varies: 780 W on 115 V single-phase, 1490 W on 230 V single-phase, 2480 W on 400 V three-phase, and 2600 W on 480 V three-phase. The peak stall torque reaches 40.5 N·m across the three-phase range, and the maximum current Irms is 32.3 A — the drive must be sized for that peak current, not the continuous rating. ## Brake and encoder — what the holding torque and feedback type mean for the application The holding brake delivers 12 N·m (106.2 lbf·in) — enough to hold a vertical-axis load at standstill without servo current. The brake is engaged when the motor is unpowered; it is released by the drive's brake control output. Confirm the drive's brake voltage and current rating match the motor's brake coil spec before wiring. The encoder is an absolute single-turn SinCos Hiperface type. Single-turn means position is retained within one revolution after power loss, but absolute position over multiple turns is not stored — a homing sequence is required on power-up if the application needs multi-turn position. The SinCos interface is analogue sine/cosine with a digital Hiperface protocol; the drive must support Hiperface, not just EnDat or BiSS. ## Environmental sealing and mechanical fit IP65 on the motor body and shaft bushing, IP67 on the housing — the motor survives washdown and hose-directed water, but the connector must be mated with the correct IP-rated cordset to maintain the seal. The rotatable right-angled connector allows the cable exit to be oriented in 4 x 90° positions, which helps in tight cable-tray layouts. The motor flange is 100 mm (3.9 in) with a 95 mm centring collar and 9 mm mounting holes. The smooth shaft is 24 mm diameter, 50 mm long. Maximum radial force at 3000 rpm is 740 N; at 1000 rpm it is 1070 N — the load coupling must stay within these limits to avoid bearing damage.","metaTitle":"Schneider Electric SH31004P01F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31004P01F2200 SH3 servo motor, 2500 W continuous, 3000 rpm at 400 V three-phase, 12 N·m holding brake, IP65/IP67, absolute single-turn","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"12.1 in (307.5 mm)","Inertia":"1.025 kg.cm² of brake 0.0 kg.cm² of motor","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"5.245 kg.cm²","Holding torque":"106.2 lbf.in (12 N.m)","Nominal torque":"87.6 lbf.in (9.9 N.m) 115 V single phase 84.08 lbf.in (9.5 N.m) 230 V single phase 69.9 lbf.in (7.9 N.m) 400 V three phase 61.07 lbf.in (6.9 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2500 W","Mounting Support":"International standard flange","Sizing reference":"SH31004P","Back emf constant":"103 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"358.5 lbf.in (40.5 N.m) 115...480 V three phase","Stator inductance":"18.35 mH","Stator resistance":"1.81 Ohm","Maximum current Irms":"32.3 A","Nominal output power":"780 W 115 V single phase 1490 W 230 V single phase 2480 W 400 V three phase 2600 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"32.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"88.5 lbf.in (10 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1070 N 1000 rpm 850 N 2000 rpm 740 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.2 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/80270c39584474f3b682ed1bf348cdcc.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31004P01F2200/sh3-servomotor-100mm-4-stacks-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31004P01F2200/alternatives.json"},"ai":{"faq":[{"question":"What supply voltages does the SH31004P01F2200 run on, and what speed do I get?","answer":"It runs on both single-phase and three-phase supplies. At 115 V single-phase it delivers 750 rpm; at 230 V single-phase, 1500 rpm; at 400 V three-phase, 3000 rpm; at 480 V three-phase, 3600 rpm. The nominal torque also varies with voltage — from 9.9 N·m down to 6.9 N·m. The drive must be configured for the actual line voltage."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31004P01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31004P01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}