{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31004P0BF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31004P0BF3000","canonicalUrl":"https://aoctrl.com/schneider/SH31004P0BF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31004P0BF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31004P0BF3000, 2.5 kW continuous power, 3000 rpm at 400 V three-phase, absolute multiturn Hiperface DSL encoder, IP65, smooth shaft, 12 N·m holding brake.","salesMarkdown":"## Motor specs that decide the fit The SH31004P0BF3000: This SH3 series servo motor delivers 2.5 kW continuous power and hits 3000 rpm on 400 V three-phase supply — the nominal torque at that point is 7.9 N·m, but the holding brake locks 12 N·m, so it holds a vertical load without back-driving the gearbox. The absolute multiturn Hiperface DSL encoder means no homing sequence on power-up — the position is known from the moment the drive enables, which saves a cycle on every restart. IP65 on the motor body (with IP54 at the shaft bushing unless a seal ring is fitted) means it handles washdown in food or beverage lines, but the shaft seal needs attention if water jets hit the output end directly. ## Brake and torque — what the numbers mean The holding brake pulls 18 W to release — factor that into the 24 VDC supply sizing if the brake is held open for long periods; the coil temperature rise is accounted for in the 130 °C copper hot rating. Peak stall torque hits 40.5 N·m across the 115–480 V three-phase range — that's the short-duration torque for acceleration or emergency stop, not continuous duty. Continuous stall torque is 10 N·m at 6.2 A. ## Mounting and connection details International standard flange, 100 mm square, with a 95 mm centring collar and 9 mm mounting holes — bolts directly to the standard IEC metric pattern without adapter plates. Smooth shaft, 24 mm diameter, 50 mm long — no keyway, so the coupling or pulley must clamp onto the shaft with a friction lock; the smooth end gives a clean interface for collet-style couplings. Straight quicklock connector for power and feedback — no right-angle adapter needed in tight cabinets, but leave clearance for the connector body and cable bend radius.","metaTitle":"Schneider Electric SH31004P0BF3000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31004P0BF3000 servo motor with brake, 2.5 kW continuous power, 3000 rpm at 400 V three-phase, absolute multiturn Hiperface DSL encoder","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"12.1 in (307.5 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"5.245 kg.cm²","Holding torque":"106.2 lbf.in (12 N.m)","Nominal torque":"84.08 lbf.in (9.5 N.m) 230 V single phase 69.9 lbf.in (7.9 N.m) 400 V three phase 61.07 lbf.in (6.9 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2500 W","Mounting Support":"International standard flange","Sizing reference":"SH31004P","Back emf constant":"103 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"358.5 lbf.in (40.5 N.m) 115...480 V three phase","Stator inductance":"13 mH","Stator resistance":"1.8 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"32.3 A","Nominal output power":"1490 W 230 V single phase 2480 W 400 V three phase 2480 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"20 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"88.5 lbf.in (10 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"115 N 2000 rpm 100 N 3000 rpm 145 N 1000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.2 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/bbf4136fc05ae91dd873a7f98d9a6e9b.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31004P0BF3000/sh3-omc-motor-100mm-4-st-ip65-54-smooth-sh-dsl-multi-turn-str-conn-m23-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31004P0BF3000/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH31004P0BF3000 in the same family?","answer":"No official successor or direct cross-reference is recorded for this exact order code. The sizing reference SH31004P points to the same frame and power class — any alternative would need to match the 100 mm flange, 24 mm smooth shaft, Hiperface DSL encoder, and holding brake. Confirm the mating drive and mechanical interface before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31004P0BF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31004P0BF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}