{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31004P11A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31004P11A1200","canonicalUrl":"https://aoctrl.com/schneider/SH31004P11A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31004P11A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31004P11A1200, 2.5 kW continuous power, 3000 rpm at 400 V three phase, 100 mm flange, IP65/IP67, absolute single-turn SinCos Hiperface encoder.","salesMarkdown":"## Speed and torque across the supply range The SH31004P11A1200: This motor delivers 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase — the speed is supply-dependent, so match the drive input to your line voltage for the target base speed. Nominal torque follows the same pattern: 9.9 N·m at 115 V single-phase, dropping to 6.9 N·m at 480 V three-phase. The 2.5 kW continuous power rating is the sizing anchor — the torque-speed envelope is bounded by the thermal limit of the natural-convection cooling. ## Encoder feedback and mechanical interface The absolute single-turn SinCos Hiperface encoder provides position feedback without a homing cycle on power-up — the drive reads the absolute position within one revolution. This cuts cycle time on machines that power-cycle between batches. Shaft diameter is 24 mm with a parallel key and 50 mm shaft length. The 100 mm flange and 95 mm centring collar match the standard IEC mounting pattern — no adapter plate needed for most servo gearboxes or linear actuators. ## IP protection and environmental sealing IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5. The housing seal lets the motor survive washdown — the shaft bushing is the wet-end limit; a shaft seal kit extends life in direct spray zones.","metaTitle":"Schneider Electric SH31004P11A1200 Servo Motor, 2.5 kW","metaDescription":"Schneider Electric SH31004P11A1200 servo motor, 2.5 kW continuous, 3000 rpm at 400 V three phase, IP65/IP67, absolute SinCos encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31004P11A1200","Length":"10.9 in (276.5 mm)","Inertia":"0.0 kg.cm² of brake 4.22 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 4 stacks, keyed Shaft, SinCos Singleturn 128, no Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"4.22 kg.cm²","Nominal torque":"87.6 lbf.in (9.9 N.m) 115 V single phase 84.08 lbf.in (9.5 N.m) 230 V single phase 69.9 lbf.in (7.9 N.m) 400 V three phase 61.07 lbf.in (6.9 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2500 W","Mounting Support":"International standard flange","Sizing reference":"SH31004P","Back emf constant":"103 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"358.5 lbf.in (40.5 N.m) 115...480 V three phase","Stator inductance":"6.5 mH","Stator resistance":"1.81 Ohm","Maximum current Irms":"32.3 A","Nominal output power":"780 W 115 V single phase 1490 W 230 V single phase 2480 W 400 V three phase 2600 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"32.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"88.5 lbf.in (10 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1070 N 1000 rpm 850 N 2000 rpm 740 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.2 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cc5b150afaa7cce1180c89a76b829ddb.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31004P11A1200/sh3-servomotor-100mm-4-stacks-keyed-shaft-sincos-singleturn-128-no-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is the lead time and how can I order SH31004P11A1200?","answer":"Submit an RFQ with your target quantity and delivery window for a firm lead time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31004P11A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31004P11A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}