{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31004P11F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31004P11F1000","canonicalUrl":"https://aoctrl.com/schneider/SH31004P11F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31004P11F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31004P11F1000 SH3 servo motor with holding brake, 2.5 kW continuous power, 40.5 Nm peak stall torque, absolute single-turn SinCos Hiperface encoder, IP65 motor, 100 mm flange, 24 mm shaft with parallel key.","salesMarkdown":"## Torque and speed across the supply range The SH31004P11F1000: This SH3 frame servo delivers a continuous power of 2500 W, but the nominal torque and speed are supply-voltage dependent — a critical point for multi-voltage machine builds. At 400 V three-phase, nominal torque is 7.9 Nm at 3000 rpm; at 480 V three-phase, it's 6.9 Nm at 3600 rpm. On single-phase 230 V, expect 9.5 Nm at 1500 rpm, and on 115 V single-phase, 9.9 Nm at 750 rpm. The peak stall torque is 40.5 Nm across the 115...480 V three-phase range — this is the short-duration overload capability for acceleration or emergency stops, not the continuous rating. Continuous stall torque is 10 Nm, so the motor can hold that load indefinitely at standstill. The absolute single-turn SinCos Hiperface encoder provides position feedback on power-up without a homing sequence, within one electrical revolution. This is the standard for multi-axis applications where the machine must resume position after a power cycle — no battery backup required for the single-turn range. ## Mechanical interface and environmental sealing The motor flange is 100 mm (3.9 in) with a centring collar depth of 3.5 mm and four mounting holes at 9.0 mm diameter — standard IEC metric flange pattern. The shaft is 24 mm diameter with a parallel key (8 mm key width), 50 mm shaft length, and the shaft end is parallel keyed. IP degree of protection is rated IP65 for the motor body and IP65 for the shaft bushing when the shaft seal ring is fitted, per IEC 60034-5. Without the shaft seal ring, the shaft bushing drops to IP54. For washdown or coolant-exposed environments, specify the shaft seal ring option. Maximum radial force is 1070 N at 1000 rpm, derating to 740 N at 3000 rpm. Maximum axial force is 160 N. These limits govern belt-drive or direct-coupling selections — exceeding them shortens bearing life. ## Electrical parameters and cooling Stator resistance is 1.81 Ohm and stator inductance is 18.35 mH — these values set the electrical time constant and influence the drive's current-loop tuning. The torque constant is 1.62 Nm/A at 120 °C copper temperature; back EMF constant is 103 V/krpm at 20 °C. Maximum continuous current (Irms) is 32.3 A, with a 3-second peak output current of 32.3 A — the peak-to-continuous ratio is 1:1, meaning the motor is thermally limited at peak current to 3 seconds. Cooling is by natural convection (no external fan), so derate for zero-speed or low-speed duty cycles. The electrical connection options include a rotatable right-angled connector or a straight connector — both are field-configurable for cable exit direction. The motor is a 4-pole design. ## Lifecycle and sourcing — current production, quoted to order The motor is part of the PACDRIVE3 servo motor family, category 18359. Supplied one unit per package. For multi-axis builds, confirm the mating drive model and cable set from the same SH3 series.","metaTitle":"Schneider Electric SH31004P11F1000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31004P11F1000 SH3 servo motor with holding brake, 2.5 kW continuous power, 40.5 Nm peak torque, absolute single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"12.1 in (307.5 mm)","Inertia":"1.025 kg.cm² of brake 0.0 kg.cm² of motor","Category":"18359-PACDRIVE3 SERVO MOTORS","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"5.245 kg.cm²","Holding torque":"106.2 lbf.in (12 N.m)","Nominal torque":"87.6 lbf.in (9.9 N.m) 115 V single phase 84.08 lbf.in (9.5 N.m) 230 V single phase 69.9 lbf.in (7.9 N.m) 400 V three phase 61.07 lbf.in (6.9 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2500 W","Mounting Support":"International standard flange","Sizing reference":"SH31004P","Back emf constant":"103 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"358.5 lbf.in (40.5 N.m) 115...480 V three phase","Stator inductance":"18.35 mH","Stator resistance":"1.81 Ohm","Maximum current Irms":"32.3 A","Nominal output power":"780 W 115 V single phase 1490 W 230 V single phase 2480 W 400 V three phase 2600 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"32.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"88.5 lbf.in (10 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1070 N 1000 rpm 850 N 2000 rpm 740 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.2 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e611d52416291cb7b9479c0d4904b128.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31004P11F1000/servo-motor-sh3-100-10nmkeysinglebrakestr-connip54-ip656k-rpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31004P11F1000/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH31004P11F1000?","answer":"The motor carries IP65 protection per IEC 60034-5. The encoder is an absolute single-turn SinCos Hiperface type. No specific RoHS, REACH, or UL declaration is listed in the available record; confirm with the supplier at RFQ for your jurisdiction's requirements."},{"question":"What is the shaft diameter and key size on SH31004P11F1000?","answer":"The shaft diameter is 24 mm with a parallel key of 8 mm width. The shaft length is 50 mm, and the shaft end is parallel keyed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31004P11F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31004P11F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}