{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31004P11F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31004P11F2100","canonicalUrl":"https://aoctrl.com/schneider/SH31004P11F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31004P11F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31004P11F2100 SH3 series servo motor with brake, three-phase, 2.5 kW continuous power, 100 mm flange, IP65, absolute single-turn SinCos Hiperface encoder, 12 N.m holding brake.","salesMarkdown":"## 100 mm flange, 307.5 mm body — envelope fit for a 2.5 kW axis The SH31004P11F2100 is a three-phase servo motor from the SH3 series, delivering 2500 W continuous power through a 100 mm IEC flange. The overall body length is 307.5 mm, with a 24 mm shaft extending 50 mm and an 8 mm parallel keyway — confirm the mating load-side coupling and bell-housing depth against these dimensions before committing the BOM line. ## Speed-torque envelope — 750 to 3600 rpm, 40.5 N.m peak Nominal speed depends on supply: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, 3600 rpm at 480 V three-phase. Nominal torque follows the same curve — 9.9 N.m at 115 V single-phase, dropping to 6.9 N.m at 480 V three-phase. Peak stall torque reaches 40.5 N.m across the 115–480 V three-phase range, which sets the acceleration limit for short-duration moves. Continuous stall torque is 10 N.m over the same voltage range — this is the thermal limit for holding at zero speed. ## Absolute SinCos Hiperface encoder — no homing cycle needed Feedback is an absolute single-turn SinCos Hiperface encoder. Single-turn means position is known within one revolution after power-up — no reference run required for rotary indexing. The SinCos analog track provides fine interpolation beyond the digital resolution; the Hiperface protocol carries both position and temperature data on the same pair of wires. This encoder type is compatible with Schneider's Lexium 28, 32, and some third-party drives that support the Hiperface interface. ## IP65 — washdown-ready for wet or dusty environments Both the motor body and shaft bushing carry IP65 protection per IEC 60034-5. The straight connector (rotatable right-angled variant available) seals against ingress, so the motor can be deployed in food-and-beverage washdown zones, outdoor conveyor lines, or machining coolant splash areas without a secondary cover. Cooling is by natural convection — no fan, so no forced-air path that could pull contaminants in. ## Electrical parameters — stator resistance, inductance, torque constant Stator resistance is 1.81 Ω, stator inductance 6.5 mH. The torque constant is 1.62 N.m/A at 120 °C copper temperature — derate the continuous current limit (maximum 32.3 A rms) by this figure to estimate available torque at thermal steady state. Back EMF constant is 103 V/krpm at 20 °C; at higher speeds the drive's DC bus voltage must exceed the back EMF plus resistive drop to maintain current control. The 3-second peak current matches the maximum rms current at 32.3 A — the drive's peak current capability must at least match this to achieve the 40.5 N.m peak stall torque.","metaTitle":"Schneider Electric SH31004P11F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31004P11F2100 servo motor with brake. 2.5 kW continuous, 100 mm flange, IP65, Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31004P11F2100","Length":"12.1 in (307.5 mm)","Inertia":"1.025 kg.cm² of brake 4.22 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 4 stacks, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"5.245 kg.cm²","Holding torque":"106.2 lbf.in (12 N.m)","Nominal torque":"87.6 lbf.in (9.9 N.m) 115 V single phase 84.08 lbf.in (9.5 N.m) 230 V single phase 69.9 lbf.in (7.9 N.m) 400 V three phase 61.07 lbf.in (6.9 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2500 W","Mounting Support":"International standard flange","Sizing reference":"SH31004P","Back emf constant":"103 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"358.5 lbf.in (40.5 N.m) 115...480 V three phase","Stator inductance":"6.5 mH","Stator resistance":"1.81 Ohm","Maximum current Irms":"32.3 A","Nominal output power":"780 W 115 V single phase 1490 W 230 V single phase 2480 W 400 V three phase 2600 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"32.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"88.5 lbf.in (10 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1070 N 1000 rpm 850 N 2000 rpm 740 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.2 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/db605f847e31aeeb22d96ad9a2dc7cdc.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31004P11F2100/sh3-servomotor-100mm-4-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH31004P11F2100?","answer":"The motor carries IP65 protection per IEC 60034-5. Compliance with RoHS, REACH, UL, and IEC standards is standard for the SH3 series, though specific certificates are not listed in the spec record — confirm with the manufacturer or distributor at RFQ time."},{"question":"What is SH31004P11F2100's listed phase and length?","answer":"The motor is three-phase. Overall body length is 307.5 mm (12.1 in), with a 100 mm flange, 24 mm shaft diameter, 50 mm shaft length, and 8 mm keyway."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31004P11F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31004P11F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}