{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31004P11F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31004P11F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31004P11F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31004P11F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with holding brake, 2.5 kW continuous power, 3000 rpm nominal at 400 V three-phase, absolute single-turn SinCos Hiperface encoder, IP65/IP67, 100 mm flange.","salesMarkdown":"## Torque and speed across the voltage range The SH31004P11F2200: This SH3 servo motor delivers 9.9 N·m nominal torque at 115 V single-phase, 7.9 N·m at 400 V three-phase, and 6.9 N·m at 480 V three-phase — the torque curve drops as line voltage rises because the constant-power region shifts. Peak stall torque is 40.5 N·m across the 115–480 V three-phase range, so the motor can handle short-duration overloads for acceleration or tight moves. Nominal speed is voltage-dependent: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. The 4-pole design keeps the base speed low enough for direct-drive applications without a gearbox on many indexing or conveyor axes. ## Encoder, brake, and feedback integrity The absolute single-turn SinCos Hiperface encoder gives position feedback on power-up without a homing cycle — critical for applications where the axis must know its location immediately after a power loss or emergency stop. Single-turn means the absolute range is one mechanical revolution; multi-turn applications need a different encoder option. ## Thermal limits and cooling reality Cooling is natural convection — no fan, so the motor relies on its own surface area and the mounting flange to shed heat. The copper winding hot-spot temperature is rated at 130 °C, and the continuous stall torque is 10 N·m across the 115–480 V three-phase range. In a confined cabinet or high-ambient environment, derate the continuous torque or add forced airflow over the housing. The stator resistance is 1.81 Ω and inductance is 18.35 mH — these values set the I²R losses and the current ripple at the drive's PWM frequency. The maximum continuous RMS current is 32.3 A, and the 3-second peak current is also 32.3 A, meaning the peak-to-continuous ratio is 1:1 — this motor is wound for continuous duty, not short-burst high-torque cycles. ## Mechanical fit and mounting constraints The motor flange is 100 mm (3.9 in) with a centring collar depth of 3.5 mm. Four mounting holes on a 9.0 mm diameter bolt circle — standard international flange pattern. The shaft is 24 mm diameter with a parallel key, key width 8 mm, and shaft length 50 mm. Overall body length is 307.5 mm (12.1 in) — measure the available envelope before committing. The electrical connection uses a rotatable right-angled connector — this lets you orient the cable exit in tight panels without adding a separate right-angle adapter. The IP rating is IP65 on the motor body and shaft bushing, and IP67 on the housing per IEC 60034-5, so it withstands washdown and dust ingress as long as the connector is properly mated. ## Bearing load limits for direct-coupled loads Maximum radial force Fr is 1070 N at 1000 rpm, dropping to 850 N at 2000 rpm, and 740 N at 3000 rpm — the bearing life is speed-dependent, so a belt-drive or overhung load at higher speeds must stay under the lower limit. Maximum axial force Fa is 160 N — suitable for direct coupling but not for thrust loads from a helical gear or lead screw without an external thrust bearing.","metaTitle":"Schneider Electric SH31004P11F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31004P11F2200 SH3 servo motor with holding brake. 2.5 kW continuous, 3000 rpm at 400 V three-phase. Absolute single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"12.1 in (307.5 mm)","Inertia":"1.025 kg.cm² of brake 0.0 kg.cm² of motor","Category":"18359-PACDRIVE3 SERVO MOTORS","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"5.245 kg.cm²","Holding torque":"106.2 lbf.in (12 N.m)","Nominal torque":"87.6 lbf.in (9.9 N.m) 115 V single phase 84.08 lbf.in (9.5 N.m) 230 V single phase 69.9 lbf.in (7.9 N.m) 400 V three phase 61.07 lbf.in (6.9 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2500 W","Mounting Support":"International standard flange","Sizing reference":"SH31004P","Back emf constant":"103 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"358.5 lbf.in (40.5 N.m) 115...480 V three phase","Stator inductance":"18.35 mH","Stator resistance":"1.81 Ohm","Maximum current Irms":"32.3 A","Nominal output power":"780 W 115 V single phase 1490 W 230 V single phase 2480 W 400 V three phase 2600 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"32.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"88.5 lbf.in (10 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1070 N 1000 rpm 850 N 2000 rpm 740 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.2 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/98290a487434da31329690887af704b6.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31004P11F2200/servo-motor-sh3-100-10nmkeysinglebrake90âconn-ip65-ip676k-rpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31004P11F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous power rating of SH31004P11F2200?","answer":"The continuous power is 2500 W. However, the nominal output power varies with supply voltage: 780 W at 115 V single-phase, 1490 W at 230 V single-phase, 2480 W at 400 V three-phase, and 2600 W at 480 V three-phase. The 2500 W figure is a nominal rating; actual available power depends on the drive voltage."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31004P11F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31004P11F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}