{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31004P1BF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31004P1BF3000","canonicalUrl":"https://aoctrl.com/schneider/SH31004P1BF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31004P1BF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31004P1BF3000, 2.5 kW continuous power, 12 Nm holding torque, absolute multiturn Hiperface DSL encoder, IP65, 100 mm flange.","salesMarkdown":"## Feedback and motion control The SH31004P1BF3000: This motor carries an absolute multiturn Hiperface DSL encoder — a single-cable digital interface that carries both power and feedback on a hybrid cable, eliminating a separate feedback harness. The multiturn count tracks absolute position through 4096 revolutions, so a machine homing cycle after a power loss is not needed. The encoder protocol is standard on Lexium 32 and Lexium 28 servo drives; the drive auto-detects the motor data plate on first power-up. ## Brake and mechanical interface The holding brake delivers 12 N·m static holding torque and draws 18 W pull-in power. The brake is spring-applied, power-off engaged — it holds the vertical axis load when the drive is disabled. The 24 mm shaft with a parallel key and 50 mm shaft length fits standard incremental encoder pulleys and coupling hubs. The 100 mm flange with a 95 mm centring collar and 9.0 mm mounting holes matches the IEC 100 frame pattern common on Lexium 32 servo gearboxes and linear actuator mounts. The motor is rated IP65 per IEC 60034-5, with the shaft bushing rated IP54 when the shaft seal ring is not fitted. In washdown or coolant-exposed environments, fit the optional shaft seal ring to keep the front bearing cavity dry. The straight quicklock connector mates with the matching Lexium power-and-feedback cable — the connector is keyed and the pin count matches the Hiperface DSL hybrid cable pinout. ## Torque and speed across supply voltages The motor's nominal torque and speed depend on the drive supply voltage. At 230 V single-phase input, the nominal output is 1.49 kW with 9.5 N·m torque at 1500 rpm. The peak stall torque is 40.5 N·m across the 115–480 V three-phase range — this is the torque available during acceleration and deceleration before the current limit trips. The continuous stall torque is 10 N·m over the same voltage range, which sets the thermal limit for holding a position under load without the winding temperature exceeding 130 °C.","metaTitle":"Schneider Electric SH31004P1BF3000 Servo Motor, 2.5 kW","metaDescription":"Schneider Electric SH31004P1BF3000 servo motor with brake. 2.5 kW continuous power, 12 Nm holding torque, absolute multiturn Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"12.1 in (307.5 mm)","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"5.245 kg.cm²","Holding torque":"106.2 lbf.in (12 N.m)","Nominal torque":"84.08 lbf.in (9.5 N.m) 230 V single phase 69.9 lbf.in (7.9 N.m) 400 V three phase 61.07 lbf.in (6.9 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.62 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2500 W","Mounting Support":"International standard flange","Sizing reference":"SH31004P","Back emf constant":"103 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"358.5 lbf.in (40.5 N.m) 115...480 V three phase","Stator inductance":"13 mH","Stator resistance":"1.8 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"32.3 A","Nominal output power":"1490 W 230 V single phase 2480 W 400 V three phase 2480 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"20 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"88.5 lbf.in (10 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"145 N 1000 rpm 115 N 2000 rpm 100 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6.2 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ae646de895d646f30fa04144f1db7037.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31004P1BF3000/sh3-servomotor-100mm-4-stacks-keyed-shaft-multiturn-dsl-18bit-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31004P1BF3000/alternatives.json"},"ai":{"faq":[{"question":"What encoder does the SH31004P1BF3000 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder. This is a single-cable digital interface that carries both power and feedback, eliminating a separate feedback cable. The multiturn count tracks absolute position through 4096 revolutions."},{"question":"What is the holding torque of the brake on SH31004P1BF3000?","answer":"The holding brake delivers 12 N·m static holding torque. It is spring-applied and power-off engaged, meaning it holds the load when drive power is removed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31004P1BF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31004P1BF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}