{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31401M01A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31401M01A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31401M01A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31401M01A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31401M01A2200, 1700 W continuous power, 11 Nm nominal torque at 400 V three-phase, 4000 rpm max mechanical speed, IP65, absolute single-turn SinCos Hiperface encoder, smooth shaft, without holding brake, rotatable right-angled connector.","salesMarkdown":"## Motor ratings across supply configurations The SH31401M01A2200 is a three-phase servo motor from Schneider Electric's SH3 series, delivering 1700 W continuous power. Its nominal speed and torque depend on the supply voltage: 375 rpm at 115 V single-phase, 750 rpm at 230 V single-phase, 1500 rpm at 400 V three-phase, and 1800 rpm at 480 V three-phase. Nominal torque ranges from 11 Nm at 115 V single-phase down to 10.4 Nm at 480 V three-phase, with continuous stall torque rated at 11.1 Nm across the 115-480 V three-phase range. Peak stall torque reaches 27 Nm under the same three-phase conditions. ## Position feedback and environmental sealing The motor carries an absolute single-turn SinCos Hiperface encoder, giving the drive controller position feedback on power-up without a homing routine — critical for applications that must resume from the last known position after a power cycle. IP65 rating on the motor body and shaft bushing, plus IP67 on the housing per IEC 60034-5, means this motor withstands washdown and dust ingress on food, beverage, or packaging lines. The rotatable right-angled connector lets the cable exit point be oriented after installation, simplifying routing in tight cabinets. ## Mechanical interface and shaft details The motor mounts on an international standard flange with a 140 mm (5.5 in) flange size and a 130 mm centring collar. The shaft is 24 mm diameter, 50 mm long, smooth (no keyway), with an 8 mm key width — confirm the coupling or pulley bore matches a smooth shaft before ordering. ## Electrical parameters and thermal limits Stator resistance is 5.3 Ω and inductance is 88.55 mH. The torque constant is 2.78 Nm/A at 120 °C copper temperature, and the back-EMF constant is 193 V/krpm at 20 °C. Continuous stall current is 4 A, with a maximum RMS current of 10.8 A. The motor is cooled by natural convection — no external fan, so the thermal budget depends on the mounting surface and ambient airflow. The hot-spot copper temperature limit is 130 °C. ## Sourcing and lifecycle status The sizing reference SH31401M identifies the motor family for drive parameter pre-loads.","metaTitle":"Schneider Electric SH31401M01A2200 Servo Motor, 1700 W","metaDescription":"Schneider Electric SH31401M01A2200 SH3 servo motor, 1700 W continuous power, 11 Nm nominal torque at 400 V three-phase, IP65, absolute single-turn Hiperface","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.6 in (217.5 mm)","Key width":"0.3 in (8 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"Without","Nominal speed":"375 rpm 115 V single phase 750 rpm 230 V single phase 1500 rpm 400 V three phase 1800 rpm 480 V three phase","Rotor inertia":"7.41 kg.cm²","Nominal torque":"97.4 lbf.in (11 N.m) 115 V single phase 96.92 lbf.in (10.95 N.m) 230 V single phase 93.8 lbf.in (10.6 N.m) 400 V three phase 92.05 lbf.in (10.4 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"2.78 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1700 W","Mounting Support":"International standard flange","Sizing reference":"SH31401M","Back emf constant":"193 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m) 115...480 V three phase","Stator inductance":"88.55 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"10.8 A","Nominal output power":"430 W 115 V single phase 860 W 230 V single phase 1670 W 400 V three phase 1960 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"98.2 lbf.in (11.1 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d37e992f761b6af3fe5037994cb1b681.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31401M01A2200/sh3-servomotor-140mm-1-stack-high-torque-smooth-shaft-sincos-singleturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31401M01A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of SH31401M01A2200 at 400 V three-phase?","answer":"At 400 V three-phase, nominal torque is 10.6 Nm. At 480 V three-phase it is 10.4 Nm. Continuous stall torque across the three-phase range is 11.1 Nm."},{"question":"Does SH31401M01A2200 include a holding brake?","answer":"No, this variant is specified without a holding brake. If a brake is required, a different order code from the SH3 family must be selected."},{"question":"What IP rating does SH31401M01A2200 have?","answer":"IP65 on the motor body and shaft bushing, IP67 on the housing, per IEC 60034-5. Suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31401M01A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31401M01A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}