{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31401M01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31401M01F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31401M01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31401M01F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31401M01F2200, 1700 W continuous power, 4000 rpm maximum mechanical speed, 23 N·m holding torque, absolute single-turn SinCos Hiperface encoder, IP65/IP67, natural convection cooling.","salesMarkdown":"## Motor ratings and supply-voltage dependency The SH31401M01F2200 is a three-phase servo motor from the SH3 series, rated for 1700 W continuous power with natural convection cooling — no external fan or coolant circuit needed for the rated duty. Nominal speed shifts with the supply: 375 rpm on 115 V single-phase, 750 rpm on 230 V single-phase, 1500 rpm on 400 V three-phase, and 1800 rpm on 480 V three-phase. Maximum mechanical speed is 4000 rpm regardless of supply. Nominal torque also varies by supply: 11 N·m at 115 V single-phase, 10.95 N·m at 230 V single-phase, 10.6 N·m at 400 V three-phase, and 10.4 N·m at 480 V three-phase. Continuous stall torque across the three-phase range is 11.1 N·m at 4 A continuous stall current. Peak stall torque reaches 27 N·m across the 115–480 V three-phase range, useful for short-duration acceleration or overcoming static friction during startup. ## Holding brake and encoder feedback Feedback comes from an absolute single-turn SinCos Hiperface encoder, providing position data at power-up without a homing cycle. The single-turn resolution is adequate for applications where the load does not rotate more than one revolution from the reference position. The torque constant is 2.78 N·m/A at 120 °C copper temperature, and the back EMF constant is 193 V/krpm at 20 °C — both values needed for drive tuning and current-loop gain calculation. ## Mechanical interface and environmental sealing Mounting uses an international standard flange with a 140 mm flange size, 130 mm centring collar diameter, and 3.5 mm centring collar depth. Four mounting holes at 11 mm diameter on the flange face. The shaft is 24 mm diameter with a smooth end, 50 mm shaft length, and 8 mm keyway width — a standard metric keyed interface for coupling to lead screws, belts, or gearboxes. IP65 rating on the motor body and shaft bushing, IP67 on the housing — both conforming to IEC 60034-5. The rotatable right-angled connector allows cable exit orientation adjustment during installation without opening the motor.","metaTitle":"Schneider Electric SH31401M01F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31401M01F2200 SH3 servo motor with holding brake. 1700 W continuous power, 4000 rpm max speed, 23 N·m holding torque.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.06 in (255.5 mm)","Key width":"0.3 in (8 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"375 rpm 115 V single phase 750 rpm 230 V single phase 1500 rpm 400 V three phase 1800 rpm 480 V three phase","Rotor inertia":"9.21 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"97.4 lbf.in (11 N.m) 115 V single phase 96.92 lbf.in (10.95 N.m) 230 V single phase 93.8 lbf.in (10.6 N.m) 400 V three phase 92.05 lbf.in (10.4 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"2.78 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1700 W","Mounting Support":"International standard flange","Sizing reference":"SH31401M","Back emf constant":"193 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m) 115...480 V three phase","Stator inductance":"88.55 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"10.8 A","Nominal output power":"430 W 115 V single phase 860 W 230 V single phase 1670 W 400 V three phase 1960 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"98.2 lbf.in (11.1 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e9ba56bc1b0589e52a22eb0f0f3ea1f7.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31401M01F2200/sh3-servomotor-140mm-1-stack-high-torque-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31401M01F2200/alternatives.json"},"ai":{"faq":[{"question":"What supply voltages does SH31401M01F2200 support and what speed do I get at each?","answer":"The motor runs on three-phase or single-phase supplies. Nominal speed is 375 rpm at 115 V single-phase, 750 rpm at 230 V single-phase, 1500 rpm at 400 V three-phase, and 1800 rpm at 480 V three-phase. Maximum mechanical speed is 4000 rpm."},{"question":"What encoder type is on the SH31401M01F2200?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides absolute position feedback within one revolution, so the drive knows the rotor position at power-up without a homing sequence."},{"question":"What is the holding torque of the brake on SH31401M01F2200?","answer":"The holding brake delivers 23 N·m (203.6 lbf·in) holding torque. This is sufficient to hold the load stationary when power is removed, suitable for vertical-axis or gravity-loaded applications without an external brake."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31401M01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31401M01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}