{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31401M02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31401M02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31401M02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31401M02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31401M02F2200, 1700 W continuous power, 11 Nm nominal torque, absolute multiturn SinCos Hiperface encoder, IP65/IP67, three phase.","salesMarkdown":"## What this SH3 servo motor delivers The SH31401M02F2200 is a 1700 W continuous-power servo motor from Schneider Electric's SH3 series, fitted with a holding brake and an absolute multiturn SinCos Hiperface encoder. The brake holds 23 N.m static torque, which means the motor holds its position on a vertical axis without a separate mechanical lock. Nominal torque varies with supply: 11 N.m at 115 V single phase, 10.95 N.m at 230 V single phase, 10.6 N.m at 400 V three phase, and 10.4 N.m at 480 V three phase. The peak stall torque hits 27 N.m across the three-phase range, so the motor can deliver a short burst for acceleration or overcoming a jam. Speed also depends on the line voltage: 375 rpm at 115 V single phase, 750 rpm at 230 V single phase, 1500 rpm at 400 V three phase, and 1800 rpm at 480 V three phase. Maximum mechanical speed is 4000 rpm, so the motor can run above the nominal speed if the drive and load allow. ## Encoder and feedback for position loops The absolute multiturn SinCos Hiperface encoder gives position feedback without a home cycle after power loss — the multiturn count is retained. This matters for applications like pick-and-place or gantry axes where the controller needs absolute position on restart. The back EMF constant is 193 V/krpm at 20 °C, and the torque constant is 2.78 N.m/A at 120 °C copper temperature. These numbers let the drive calculate the motor's voltage and current demand across the speed range. ## Mounting and environmental sealing The motor uses an international standard flange with a 140 mm flange size and a 130 mm centring collar. The shaft is smooth, 24 mm diameter, 50 mm long, with an 8 mm keyway. Mounting holes are 11 mm diameter. IP65 on the motor and shaft bushing, IP67 on the housing — conforming to IEC 60034-5. That means the motor body can handle hose-down cleaning and the shaft seal resists water ingress, suitable for food processing or washdown zones.","metaTitle":"Schneider Electric SH31401M02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31401M02F2200 servo motor with brake, 1700 W continuous power, IP65/IP67, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.06 in (255.5 mm)","Key width":"0.3 in (8 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"375 rpm 115 V single phase 750 rpm 230 V single phase 1500 rpm 400 V three phase 1800 rpm 480 V three phase","Rotor inertia":"9.21 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"97.4 lbf.in (11 N.m) 115 V single phase 96.92 lbf.in (10.95 N.m) 230 V single phase 93.8 lbf.in (10.6 N.m) 400 V three phase 92.05 lbf.in (10.4 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"2.78 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1700 W","Mounting Support":"International standard flange","Sizing reference":"SH31401M","Back emf constant":"193 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m) 115...480 V three phase","Stator inductance":"88.55 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"10.8 A","Nominal output power":"430 W 115 V single phase 860 W 230 V single phase 1670 W 400 V three phase 1960 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"98.2 lbf.in (11.1 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/aebb630fff1598efaf1cbe9128ca336b.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31401M02F2200/sh3-servomotor-140mm-1-stack-high-torque-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31401M02F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH31401M02F2200?","answer":"The holding brake delivers 23 N.m (203.6 lbf.in) static holding torque, enough to hold a vertical load at standstill without a separate mechanical lock."},{"question":"What encoder type does SH31401M02F2200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, which provides position feedback without a homing cycle after power loss."},{"question":"How can I order SH31401M02F2200 or check availability?","answer":"Submit an RFQ for current availability and pricing — no stock-holding claim is made here."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31401M02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31401M02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}