{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31401M12A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31401M12A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31401M12A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31401M12A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31401M12A2200, 1700 W continuous power, 1500 rpm at 400 V three-phase, 10.6 Nm nominal torque, absolute multiturn SinCos Hiperface encoder, IP65/IP67, without holding brake, rotatable right-angled connector.","salesMarkdown":"## Three-phase supply, voltage-dependent speed — the key fit constraint The SH31401M12A2200: This is a three-phase servo motor — it will not run on a single-phase supply without a VFD that synthesizes three-phase output. The nominal speed shifts with the line voltage: 1500 rpm at 400 V three-phase, 1800 rpm at 480 V three-phase, and lower speeds on single-phase inputs (375 rpm at 115 V, 750 rpm at 230 V). For a 400 V European line, the working speed is 1500 rpm; for a 480 V North American line, it's 1800 rpm. Confirm your supply voltage before specifying. Torque also follows the voltage: 10.6 Nm at 400 V three-phase, 10.4 Nm at 480 V three-phase, and drops to 11 Nm at 115 V single-phase. The continuous stall torque is 11.1 Nm across the three-phase range, so the motor delivers consistent holding torque regardless of the line voltage within that band. ## No holding brake — plan for external braking on vertical axes Maximum radial force Fr is 1930 N at 1000 rpm, dropping to 1340 N at 3000 rpm. Maximum axial force Fa is 300 N. These limits govern bearing life — overshoot them and the motor bearings fail prematurely, especially on belt-driven loads. ## Absolute multiturn Hiperface encoder — no homing sequence needed The encoder is an absolute multiturn SinCos Hiperface type. On power-up, the drive reads the absolute position directly — no reference run or homing sequence. This saves cycle time on multi-axis machines and eliminates the need for a home sensor. The SinCos interface provides analog sine/cosine signals for high-resolution interpolation; the Hiperface protocol carries the absolute position data over a serial link. The electrical connection is a rotatable right-angled connector. This lets you orient the cable exit in tight cabinets without adding a separate right-angle adapter. The connector is IP65-rated when mated. ## IP65 motor, IP67 housing — washdown-ready but shaft seal is the limit The motor body meets IP65, the housing meets IP67 per IEC 60034-5. That means the motor withstands hose-directed water (IP65) and brief immersion (IP67). The shaft bushing is IP65 — not IP67 — so prolonged submersion at the shaft exit will ingress. For food-and-bev washdown, mount the motor with the connector pointing down and keep the shaft bushing above the water line. Cooling is natural convection — no fan, no forced air. The motor relies on its own surface area and the mounting flange to dissipate heat. Continuous stall current is 4 A; the maximum continuous current Irms is 10.8 A. The thermal limit is set by the copper hot-spot temperature of 130 °C.","metaTitle":"Schneider Electric SH31401M12A2200 Servo Motor, 1700 W","metaDescription":"Schneider Electric SH31401M12A2200 SH3 servo motor, 1700 W continuous, 1500 rpm at 400 V three-phase, 10.6 Nm torque, absolute multiturn Hiperface encoder","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.6 in (217.5 mm)","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"Without","Nominal speed":"375 rpm 115 V single phase 750 rpm 230 V single phase 1500 rpm 400 V three phase 1800 rpm 480 V three phase","Rotor inertia":"7.41 kg.cm²","Nominal torque":"97.4 lbf.in (11 N.m) 115 V single phase 96.92 lbf.in (10.95 N.m) 230 V single phase 93.8 lbf.in (10.6 N.m) 400 V three phase 92.05 lbf.in (10.4 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"2.78 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1700 W","Mounting Support":"International standard flange","Sizing reference":"SH31401M","Back emf constant":"193 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m) 115...480 V three phase","Stator inductance":"88.55 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"10.8 A","Nominal output power":"430 W 115 V single phase 860 W 230 V single phase 1670 W 400 V three phase 1960 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"98.2 lbf.in (11.1 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/28760cff019fcad8a1e04a70e6259725.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31401M12A2200/sh3-servomotor-140mm-1-stack-high-torque-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31401M12A2200/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH31401M12A2200?","answer":"The motor carries IP65/IP67 ratings per IEC 60034-5. Standard Schneider documentation includes the declaration of conformity for CE/UKCA, the RoHS/REACH compliance statement, and the UL recognition file. These are available on request with the RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31401M12A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31401M12A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}