{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31401M12F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31401M12F1100","canonicalUrl":"https://aoctrl.com/schneider/SH31401M12F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31401M12F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31401M12F1100, three-phase, 1700 W continuous power, IP65, absolute multiturn SinCos Hiperface encoder, holding brake 23 N.m.","salesMarkdown":"## Motor ratings that decide the fit The SH31401M12F1100: Rated 1700 W continuous power with nominal torque ranging from 10.4 N.m at 480 V three-phase up to 11 N.m at 115 V single-phase — the torque curve shifts with the supply voltage, so the actual load capacity depends on the line voltage at the cabinet. Nominal speed climbs with voltage: 375 rpm on 115 V single-phase, 750 rpm on 230 V single-phase, 1500 rpm on 400 V three-phase, and 1800 rpm on 480 V three-phase. The maximum mechanical speed is 4000 rpm, but the usable range is limited by the available supply. Holding brake torque is 23 N.m (203.6 lbf.in) — sufficient to hold a vertical load on a gantry or Z-axis without power, but the brake is a holding brake, not a dynamic stopping brake; cycle life depends on engaging it at zero speed. ## Encoder and feedback — what the absolute multiturn means Absolute multiturn SinCos Hiperface encoder retains position through power cycles — no homing routine on restart, which matters for applications where the machine must resume from the last known position after a power loss or emergency stop. The Hiperface protocol is a standard interface for Schneider drives (Lexium 32, 28) and many third-party servo drives; confirm the drive's encoder input compatibility before wiring, as the SinCos analog track and Hiperface digital channel require a matched receiver. ## Environmental sealing and mounting IP65 rating on both the motor body and the shaft bushing per IEC 60034-5 — the motor withstands hose-down cleaning and dust ingress, making it suitable for food processing, packaging, or washdown zones. The rotatable right-angle connector and straight connector options let the cable exit adapt to the machine frame. Mounts on an international standard flange with a 140 mm (5.5 in) flange size and a 130 mm centring collar. The 11 mm mounting holes and 3.5 mm centring collar depth match the standard SH3 frame pattern — no adapter plate needed for a Lexium drive package. No stock-holding claim — the spread is confirmed per inquiry.","metaTitle":"Schneider Electric SH31401M12F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31401M12F1100 servo motor with brake. Three-phase, 1700 W continuous power, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.06 in (255.5 mm)","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"375 rpm 115 V single phase 750 rpm 230 V single phase 1500 rpm 400 V three phase 1800 rpm 480 V three phase","Rotor inertia":"9.21 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"97.4 lbf.in (11 N.m) 115 V single phase 96.92 lbf.in (10.95 N.m) 230 V single phase 93.8 lbf.in (10.6 N.m) 400 V three phase 92.05 lbf.in (10.4 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"2.78 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1700 W","Mounting Support":"International standard flange","Sizing reference":"SH31401M","Back emf constant":"193 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m) 115...480 V three phase","Stator inductance":"88.55 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"10.8 A","Nominal output power":"430 W 115 V single phase 860 W 230 V single phase 1670 W 400 V three phase 1960 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"98.2 lbf.in (11.1 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/181d78eca2f88f7555db8deac63a4700.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31401M12F1100/sh3-servomotor-140mm-1-stack-high-torque-keyed-shaft-sincos-multiturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31401M12F1100/alternatives.json"},"ai":{"faq":[{"question":"What is SH31401M12F1100's listed phase and length?","answer":"It is a three-phase motor with an overall length of 10.06 in (255.5 mm). The shaft length is 2.0 in (50 mm) with a 0.9 in (24 mm) diameter and a parallel key."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31401M12F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31401M12F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}