{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31401M12F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31401M12F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31401M12F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31401M12F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31401M12F2200, 1.7 kW continuous, three-phase, absolute multiturn SinCos Hiperface encoder, IP65, 140 mm flange.","salesMarkdown":"## Multi-voltage speed-torque curves define the application envelope The SH31401M12F2200 delivers different nominal speeds depending on the supply: 375 rpm on 115 V single-phase, 750 rpm on 230 V single-phase, 1500 rpm on 400 V three-phase, and 1800 rpm on 480 V three-phase. Nominal torque also shifts with voltage — 11 N.m at 115 V single-phase down to 10.4 N.m at 480 V three-phase — so the motor's usable torque at a given line voltage is not a single number but a curve the drive must be tuned to. ## Absolute multiturn feedback with holding brake The absolute multiturn SinCos Hiperface encoder retains position through power cycles without a homing routine — a practical advantage on multi-axis gantries or rotary tables where lost position after a power loss means a recovery move that risks collision. The built-in holding brake delivers 23 N.m holding torque, enough to hold a vertical axis load at rest without the drive maintaining torque at zero speed. The brake is rated for the motor's full mechanical speed of 4000 rpm for emergency stops. Continuous stall torque is 11.1 N.m at 4 A, and the peak stall torque reaches 27 N.m across the 115–480 V three-phase range — the ratio tells you the motor has headroom for acceleration without oversizing the frame. ## IP65 motor with natural convection cooling The motor body carries IP65 per IEC 60034-5, the shaft bushing is IP65, and the housing is IP67 — the shaft bushing seal is the wet-end barrier, so a washdown line with directed spray at the shaft exit is within rating. No external fan means the cooling is entirely by natural convection, so the motor relies on its own surface area and the mounting flange to shed heat. The 140 mm international standard flange with a 130 mm centring collar and 11 mm mounting holes bolts directly to standard gearbox and machine frames without adaptor plates. Maximum radial force at the shaft is 1930 N at 1000 rpm, dropping to 1340 N at 3000 rpm — bearing life is set by the radial load at the operating speed, not the static rating.","metaTitle":"Schneider Electric SH31401M12F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31401M12F2200 SH3 servo motor with brake, 1.7 kW continuous, absolute multiturn SinCos Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.06 in (255.5 mm)","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"375 rpm 115 V single phase 750 rpm 230 V single phase 1500 rpm 400 V three phase 1800 rpm 480 V three phase","Rotor inertia":"9.21 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"97.4 lbf.in (11 N.m) 115 V single phase 96.92 lbf.in (10.95 N.m) 230 V single phase 93.8 lbf.in (10.6 N.m) 400 V three phase 92.05 lbf.in (10.4 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"2.78 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1700 W","Mounting Support":"International standard flange","Sizing reference":"SH31401M","Back emf constant":"193 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m) 115...480 V three phase","Stator inductance":"88.55 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"10.8 A","Nominal output power":"430 W 115 V single phase 860 W 230 V single phase 1670 W 400 V three phase 1960 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"98.2 lbf.in (11.1 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/db5f2a2398db174dccce3b7db3f8808d.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31401M12F2200/sh3-servomotor-140mm-1-stack-high-torque-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31401M12F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous power rating of the SH31401M12F2200?","answer":"The continuous power rating is 1700 W (1.7 kW). Nominal output power varies with supply voltage: 430 W on 115 V single-phase, 860 W on 230 V single-phase, 1670 W on 400 V three-phase, and 1960 W on 480 V three-phase."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31401M12F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31401M12F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}