{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31401P01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31401P01F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31401P01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31401P01F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, 2900 W continuous power, 23 Nm holding torque, absolute single-turn SinCos Hiperface encoder, IP65/IP67, three-phase.","salesMarkdown":"## Power architecture and speed range The SH31401P01F2200: This is a three-phase servo motor, so it needs a drive with a DC bus that can deliver the 20.8 A peak current. The nominal speed depends entirely on what voltage you feed it: 750 rpm on 115 V single phase, 1500 rpm on 230 V single phase, 3000 rpm on 400 V three phase, and 3600 rpm on 480 V three phase. That 3000 rpm at 400 V is the number most industrial lines will design around. Nominal torque also shifts with voltage — 9.2 Nm at 400 V three phase, dropping to 8.4 Nm at 480 V. ## Brake and encoder — what they mean for the line The integrated holding brake delivers 23 Nm of holding torque — enough to keep a vertical or Z-axis load stationary when the drive is disabled, without an external brake resistor or mechanical lock. The brake is part of the motor assembly, so it saves panel space and wiring compared to a separate brake unit. The absolute single-turn SinCos Hiperface encoder means the drive knows the rotor position at power-up — no homing sequence needed on each cycle. That matters for applications where the axis must resume position immediately after a power loss or emergency stop. ## Environmental sealing and cooling The motor body is IP65, the shaft bushing is IP65, and the housing is IP67 — all conforming to IEC 60034-5. That means the motor withstands washdown and hose-directed water, so it fits food-and-beverage lines or wet machining environments. Cooling is by natural convection — no fan, no filter to clean or replace. But that also means the motor needs free air circulation around the 140 mm flange. If it's boxed into a tight enclosure or mounted against a heat source, the 130°C copper hot-spot temperature will be reached sooner.","metaTitle":"Schneider Electric SH31401P01F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31401P01F2200 servo motor with brake, 2900 W continuous power, 23 Nm holding torque, absolute Hiperface encoder, IP65/IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.06 in (255.5 mm)","Inertia":"1.8 kg.cm² of brake 0.0 kg.cm² of motor","Category":"18359-PACDRIVE3 SERVO MOTORS","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"9.21 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"96.92 lbf.in (10.95 N.m) 115 V single phase 93.8 lbf.in (10.6 N.m) 230 V single phase 81.4 lbf.in (9.2 N.m) 400 V three phase 74.3 lbf.in (8.4 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.43 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2900 W","Mounting Support":"International standard flange","Sizing reference":"SH31401P","Back emf constant":"100 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m) 115...480 V three phase","Stator inductance":"23.72 mH","Stator resistance":"1.41 Ohm","Maximum current Irms":"20.8 A","Nominal output power":"860 W 115 V single phase 1670 W 230 V single phase 2890 W 400 V three phase 3170 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"300 N","Output current 3s peak":"20.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"98.2 lbf.in (11.1 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"7.8 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2a90e09417d83810372e1ca74d18aa97.pdf","sourceUrl":"https://www.se.com/mk/en/product/SH31401P01F2200/sh3-servomotor-140mm-1-stack-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31401P01F2200/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH31401P01F2200?","answer":"Pricing and availability are confirmed at quote time against the BOM quantity. Submit an RFQ through the storefront; the sourcing team will provide current pricing and lead time from independent distribution."},{"question":"What is the closest alternative to SH31401P01F2200 in the SH3 family?","answer":"The sizing reference SH31401P identifies the frame and winding group; any replacement would need to match the 140 mm flange, 24 mm shaft, and absolute Hiperface encoder interface."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31401P01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31401P01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}