{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31401P02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31401P02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31401P02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31401P02A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31401P02A2200, 2900 W continuous power, 140 mm flange, IP65/IP67, absolute multiturn SinCos Hiperface encoder, smooth shaft, without holding brake.","salesMarkdown":"## Voltage-dependent speed and torque — sizing for the supply The SH31401P02A2200: This SH3 servo motor delivers nominal speeds that shift with the supply: 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. Nominal torque follows the same voltage dependence — 96.92 lbf.in (10.95 N.m) at 115 V single-phase, dropping to 74.3 lbf.in (8.4 N.m) at 480 V three-phase. The continuous stall torque across the three-phase range is 98.2 lbf.in (11.1 N.m). Peak stall torque hits 239.0 lbf.in (27 N.m) on three-phase supplies (115...480 V), giving the short-term overload headroom for acceleration through a cycle. ## Encoder feedback and environmental sealing The absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the drive knows the rotor angle from the encoder's multiturn count. This matters for applications that lose and restore power mid-cycle. The motor carries IP65 on the body and shaft bushing, with IP67 on the housing — conforming to IEC 60034-5. That means the motor withstands washdown and hose-directed water, suitable for food-and-beverage or wet machining lines. Cooling is natural convection — no fan, so the 2900 W continuous power assumes free air movement around the 140 mm flange. Forced cooling is not built in; derate if the motor sits in a still, enclosed space. ## Mechanical interface and load limits The motor mounts on an international standard flange with a 140 mm centring collar diameter and 11 mm mounting holes. The centring collar depth is 3.5 mm — enough to locate the motor squarely on the gearbox or machine face without shimming. Shaft is smooth, 24 mm diameter, 50 mm length. The maximum radial force (Fr) is 1930 N at 1000 rpm, derating to 1340 N at 3000 rpm. Maximum axial force (Fa) is 300 N. These set the bearing life limit for belt-drive or direct-coupled loads — exceed them and the bearing race wears prematurely. No holding brake — the load must be held by the drive's holding torque or an external brake. The rotatable right-angled connector lets the cable exit in any of four directions, easing routing in a tight cabinet. ## Electrical parameters for drive matching Stator resistance is 1.41 Ohm, stator inductance 8.17 mH. The torque constant is 1.43 N.m/A at 120 °C, and the back EMF constant is 100 V/krpm at 20 °C. These values let the drive's autotune routine calculate the current loop gains correctly — plug them in if the drive requires manual entry. Maximum continuous current (Irms) is 20.8 A, with a 3-second peak of the same 20.8 A. Continuous stall current is 7.8 A. The drive must supply at least this peak current to reach the peak stall torque.","metaTitle":"Schneider Electric SH31401P02A2200 Servo Motor, 2900 W","metaDescription":"Schneider Electric SH31401P02A2200 servo motor, 2900 W continuous, 140 mm flange, IP65/IP67, absolute Hiperface encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31401P02A2200","Length":"8.6 in (217.5 mm)","Inertia":"0.0 kg.cm² of brake 7.41 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 140mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"7.41 kg.cm²","Nominal torque":"96.92 lbf.in (10.95 N.m) 115 V single phase 93.8 lbf.in (10.6 N.m) 230 V single phase 81.4 lbf.in (9.2 N.m) 400 V three phase 74.3 lbf.in (8.4 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.43 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2900 W","Mounting Support":"International standard flange","Sizing reference":"SH31401P","Back emf constant":"100 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"239.0 lbf.in (27 N.m) 115...480 V three phase","Stator inductance":"8.17 mH","Stator resistance":"1.41 Ohm","Maximum current Irms":"20.8 A","Nominal output power":"860 W 115 V single phase 1670 W 230 V single phase 2890 W 400 V three phase 3170 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"300 N","Output current 3s peak":"20.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"98.2 lbf.in (11.1 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"7.8 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/30d48258fc0e9673571baf5858c5b854.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31401P02A2200/sh3-servomotor-140mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH31401P02A2200?","answer":"This part is sourced through independent distribution channels. Pricing and availability are confirmed at quote time against your BOM quantity and delivery window — submit an RFQ for a current quote."},{"question":"What is SH31401P02A2200's listed phase?","answer":"The motor is a three-phase design, but it also runs on single-phase supplies at derated speed and torque — see the voltage-dependent nominal speed and torque values for single-phase 115 V and 230 V operation."},{"question":"What is SH31401P02A2200's listed length?","answer":"The overall length is 8.6 inches (217.5 mm), not including the shaft extension. The shaft adds another 2.0 inches (50 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31401P02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31401P02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}