{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31402P01F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31402P01F1000","canonicalUrl":"https://aoctrl.com/schneider/SH31402P01F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31402P01F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with holding brake, SH31402P01F1000, 3900 W continuous power, 3000 rpm at 400 V three-phase, 140 mm flange, absolute single-turn SinCos Hiperface encoder, IP54/IP65.","salesMarkdown":"## Active production — no lifecycle risk for BOM freeze The SH31402P01F1000: No stock-holding claim is made — each procurement is quoted to order. ## Speed and torque at your supply voltage This motor's nominal speed and torque are supply-voltage dependent. At 400 V three-phase, it delivers 3000 rpm with a nominal torque of 12.3 N.m; at 480 V three-phase, 3600 rpm at 9.7 N.m. The continuous power rating is 3900 W, and the peak stall torque reaches 60.1 N.m across the 115–480 V three-phase range. The 140 mm flange (IEC standard) and 24 mm smooth shaft with a 50 mm shaft length match the SH3 frame. For audit purposes, the sizing reference SH31402P is used in Schneider's selection software to pair the correct drive and cable. ## Absolute encoder and holding brake — commissioning constraints The absolute single-turn SinCos Hiperface encoder eliminates the need for a homing sequence on power-up — the position is known immediately. This simplifies commissioning on multi-axis lines where each axis must retain its position reference after a power cycle. The holding brake is rated at 23 N.m static torque. For a vertical (Z-axis) load, this holds the axis when the drive is disabled. The brake is spring-applied, power-released; the drive's brake control output must be wired and parameterised to release the brake before motion and engage it after the axis stops. ## IP rating and mechanical limits for the installation The motor is rated IP54 at the shaft bushing (without shaft seal ring) and IP65 overall, per IEC 60034-5. In a dry indoor panel or machine frame, the IP54 bushing is adequate; if washdown is required, the optional shaft seal ring upgrades the bushing to IP65. Maximum radial force at the shaft is 2240 N at 1000 rpm, derating to 1550 N at 3000 rpm. For belt-driven loads, the belt tension must stay below this curve to avoid bearing overload. Maximum axial force is 300 N — direct-coupled loads with thermal expansion must allow axial float. The maximum mechanical speed is 4000 rpm. The encoder's electrical limit may be lower — confirm the drive's speed-loop bandwidth and encoder interface before commanding overspeed. ## Electrical parameters for drive tuning Continuous stall current is 13.2 A; maximum current (Irms) is 44.1 A. The drive must be sized to supply 44 A peak for full torque during acceleration or stall conditions. The back EMF constant is 101 V/krpm at 20 °C — this sets the voltage ceiling at high speed.","metaTitle":"Schneider Electric SH31402P01F1000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31402P01F1000 servo motor with holding brake, 3900 W continuous power, 3000 rpm at 400 V three-phase, absolute single-turn SinCos","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31402P01F1000","Length":"12.2 in (310.5 mm)","Shaft end":"Smooth shaft","description":"SH3 servomotor, 140mm, 2 stacks, smooth Shaft, SinCos Singleturn 128, Brake, straight, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"14.48 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"164.6 lbf.in (18.6 N.m) 115 V single phase 151.3 lbf.in (17.1 N.m) 230 V single phase 108.9 lbf.in (12.3 N.m) 400 V three phase 85.9 lbf.in (9.7 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.47 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3900 W","Mounting Support":"International standard flange","Sizing reference":"SH31402P","Back emf constant":"101 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"531.9 lbf.in (60.1 N.m) 115...480 V three phase","Stator inductance":"11.225 mH","Stator resistance":"0.6 Ohm","Maximum current Irms":"44.1 A","Nominal output power":"1460 W 115 V single phase 2690 W 230 V single phase 3860 W 400 V three phase 3660 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"172.6 lbf.in (19.5 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"13.2 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e7083ddb8770898fa51e93bdb7088809.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH31402P01F1000/sh3-servomotor-140mm-2-stacks-smooth-shaft-sincos-singleturn-128-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"What is the lead time for SH31402P01F1000?","answer":"Lead time is confirmed at the time of RFQ against the specific order quantity. As an active-production part, it is quoted to order through authorized distribution channels; no stock-holding claim is made on this listing."},{"question":"What compliance documentation does Schneider Electric provide for SH31402P01F1000?","answer":"The motor is designed to conform to IEC 60034-5 for IP protection. Full RoHS, REACH, and CE declarations are available from Schneider Electric's documentation portal. The IP ratings are certified per IEC 60034-5 as evidenced by the datasheet."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31402P01F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31402P01F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}