{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31402P02A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31402P02A2000","canonicalUrl":"https://aoctrl.com/schneider/SH31402P02A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31402P02A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31402P02A2000 servo motor, three-phase, 3000 rpm, 12.3 Nm at 400 V, 3.9 kW continuous, IP54, absolute multiturn SinCos Hiperface encoder.","salesMarkdown":"## Motor performance across supply voltages The SH31402P02A2000: This SH3-series motor delivers different torque and speed depending on the supply configuration — a single spec number won't cover it. On three-phase 400 V it spins at 3000 rpm with 12.3 Nm nominal torque; on 480 V three-phase it reaches 3600 rpm at 9.7 Nm. For single-phase 230 V input the nominal speed drops to 1500 rpm and torque rises to 17.1 Nm. Continuous power is 3900 W, with the nominal output power varying from 1460 W on 115 V single-phase up to 3860 W on 400 V three-phase. The peak stall torque hits 60.1 Nm across the 115...480 V three-phase range — that's the short-duration overload ceiling for acceleration or hard moves. ## Encoder and feedback — commissioning reality The absolute multiturn SinCos Hiperface encoder means this motor keeps position after a power cycle — no homing routine on restart. The feedback resolution and protocol are locked to the drive's encoder card; if you're mating it to a third-party drive, confirm the Hiperface interface compatibility first. ## Mounting and cooling International standard flange, size 140 mm (5.5 in), with a centring collar diameter of 130 mm and depth of 3.5 mm. Four mounting holes on an 11 mm diameter circle. The motor is naturally convection cooled — no fan, so it relies on the machine frame or ambient airflow for heat rejection. IP54 on the shaft bushing without a shaft seal ring; IP65 on the motor body and with the shaft seal ring. For washdown environments, spec the shaft seal ring option to keep water out of the bearing cavity. ## Electrical parameters and sizing Stator resistance is 0.6 Ω, inductance 3.855 mH. Continuous stall current is 13.2 A; maximum RMS current (3 s peak) is 44.1 A. The torque constant is 1.47 N·m/A at 120 °C copper temperature — use this for drive current-loop tuning. Back EMF constant is 101 V/krpm at 20 °C — this limits the maximum achievable speed with a given DC bus voltage. The electrical connection is a rotatable right-angled connector, which helps in tight cable egress situations.","metaTitle":"Schneider SH31402P02A2000 Servo Motor, 3-phase, 3000 rpm","metaDescription":"Schneider Electric SH31402P02A2000 servo motor, 3-phase, 3000 rpm, 12.3 Nm at 400 V, IP54, absolute multiturn encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31402P02A2000","Length":"10.7 in (272.5 mm)","Inertia":"0.0 kg.cm² of brake 12.68 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"servo motor SH3 140 19,5Nm,nokey,multi,nobrake,90°conn.IP54/IP65,4k RPM","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"12.68 kg.cm²","Nominal torque":"164.6 lbf.in (18.6 N.m) 115 V single phase 151.3 lbf.in (17.1 N.m) 230 V single phase 108.9 lbf.in (12.3 N.m) 400 V three phase 85.9 lbf.in (9.7 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.47 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3900 W","Mounting Support":"International standard flange","Sizing reference":"SH31402P","Back emf constant":"101 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"531.9 lbf.in (60.1 N.m) 115...480 V three phase","Stator inductance":"3.855 mH","Stator resistance":"0.6 Ohm","Maximum current Irms":"44.1 A","Nominal output power":"1460 W 115 V single phase 2690 W 230 V single phase 3860 W 400 V three phase 3660 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"300 N","Output current 3s peak":"44.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"172.6 lbf.in (19.5 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"13.2 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0d7a305d6e818b5535d4dec2c166a8ee.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH31402P02A2000/servo-motor-sh3-140-195nmnokeymultinobrake90âconn-ip54-ip654k-rpm/"},"ai":{"faq":[{"question":"What is SH31402P02A2000's listed phase?","answer":"Three-phase operation is listed, with nominal speeds and torques specified for 400 V and 480 V three-phase supplies. It also runs on single-phase 115 V and 230 V with reduced performance."},{"question":"What is SH31402P02A2000's length?","answer":"The overall length is 10.7 inches (272.5 mm), not including the shaft extension. The shaft length is 2.0 inches (50 mm) with a 24 mm diameter."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31402P02A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31402P02A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}