{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31402P02F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31402P02F2000","canonicalUrl":"https://aoctrl.com/schneider/SH31402P02F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31402P02F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31402P02F2000, 3.9 kW continuous, 3000 rpm at 400 V three-phase, 23 N.m holding brake, absolute multiturn SinCos Hiperface encoder, IP65, smooth shaft, rotatable right-angled connector.","salesMarkdown":"## Speed-torque envelope across the supply rail The SH31402P02F2000: This is a three-phase servo motor that delivers 3000 rpm nominal speed at 400 V three-phase supply, and 3600 rpm at 480 V three-phase. On single-phase 230 V it runs 1500 rpm; on 115 V single-phase, 750 rpm. Nominal torque at 400 V three-phase is 12.3 N.m, dropping to 9.7 N.m at 480 V. Continuous stall torque across the three-phase range is 19.5 N.m — the torque ceiling for holding position under power without the brake engaged. Peak stall torque reaches 60.1 N.m across the 115…480 V three-phase range, useful for acceleration transients or breaking away a stuck load. The 44.1 A peak current (3 s) defines the drive's required peak current capability. ## Encoder, brake, and connector — the integration detail The absolute multiturn SinCos Hiperface encoder eliminates the need for a home cycle on power-up — the rotor position is known immediately. This is the encoder type for applications where a homing sequence costs cycle time or is mechanically impractical. Electrical connection is via a rotatable right-angled connector — the connector body can be oriented in 90° increments to route the cable away from the axis of motion or toward the cable tray. This avoids a hard bend radius at the motor junction box. ## Cooling, sealing, and mounting constraints Cooling is natural convection — no external fan or blower. The motor relies on the mounting flange and housing to dissipate heat; the 3.9 kW continuous rating assumes free airflow around the frame. Enclosed or confined mounting derates the usable power. IP rating is IP54 at the shaft bushing without the shaft seal ring, and IP65 on the motor body and shaft bushing when the seal ring is fitted. For washdown or wet environments, specify the shaft seal ring to protect the bearing cavity. Mounting is to the international standard flange, 140 mm (5.5 in) flange size, with a centring collar diameter of 130 mm and 11 mm mounting holes. The centring collar depth is 3.5 mm — the mating pilot bore must accept this depth for concentric alignment. Pricing and availability are confirmed at quote time against the BOM quantity. The part is sourced through authorized distribution channels with full OEM traceability.","metaTitle":"Schneider Electric SH31402P02F2000 Servo Motor, 3.9 kW","metaDescription":"Schneider Electric SH31402P02F2000 servo motor, 3.9 kW continuous, 3000 rpm at 400 V three-phase, with holding brake and absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31402P02F2000","Length":"12.2 in (310.5 mm)","Inertia":"1.8 kg.cm² of brake 12.68 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"servo motor SH3 140 19,5Nm,nokey,multi,brake,90°conn.IP54/IP65,4k RPM","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"14.48 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"164.6 lbf.in (18.6 N.m) 115 V single phase 151.3 lbf.in (17.1 N.m) 230 V single phase 108.9 lbf.in (12.3 N.m) 400 V three phase 85.9 lbf.in (9.7 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.47 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3900 W","Mounting Support":"International standard flange","Sizing reference":"SH31402P","Back emf constant":"101 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"531.9 lbf.in (60.1 N.m) 115...480 V three phase","Stator inductance":"3.855 mH","Stator resistance":"0.6 Ohm","Maximum current Irms":"44.1 A","Nominal output power":"1460 W 115 V single phase 2690 W 230 V single phase 3860 W 400 V three phase 3660 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"300 N","Output current 3s peak":"44.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"172.6 lbf.in (19.5 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"13.2 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fb6bdb9903efc70113bf5d95622b891a.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31402P02F2000/servo-motor-sh3-140-195nmnokeymultibrake90âconn-ip54-ip654k-rpm/"},"ai":{"faq":[{"question":"What is the holding brake torque on SH31402P02F2000?","answer":"The holding brake delivers 23 N.m (203.6 lbf.in) static torque. The brake adds 1.8 kg.cm² to the rotor inertia of 14.48 kg.cm²."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31402P02F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31402P02F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}