{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31402P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31402P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31402P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31402P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with holding brake, 3-phase, 3.9 kW continuous power, 3000 rpm nominal speed, 23 Nm holding torque, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft, rotatable right-angled connector.","salesMarkdown":"## Speed-torque envelope by supply voltage The SH31402P02F2200: This SH3-series 140 mm flange servo delivers 3.9 kW continuous power, but the speed and torque available depend on the supply: at 400 V three-phase it spins 3000 rpm with 12.3 Nm nominal torque; at 480 V three-phase it reaches 3600 rpm with 9.7 Nm; on single-phase 230 V it runs 1500 rpm at 17.1 Nm. The peak stall torque is 60.1 Nm across the 115-480 V three-phase range, with a corresponding 3-second peak current of 44.1 A — that's the ceiling for acceleration and deceleration transients before the drive limits. Continuous stall torque at standstill is 19.5 Nm on three-phase supplies, so the motor holds position at rated current without oversizing the drive for the holding phase. ## Feedback, brake, and environmental sealing The absolute multiturn SinCos Hiperface encoder reports position on power-up without a homing cycle — a prerequisite for coordinated multi-axis systems where a missed frame or lost position means a fault. IP65 on the motor body and shaft bushing, IP67 on the housing — the sealing withstands washdown environments, though natural convection cooling means the enclosure must allow free airflow around the finned housing. ## Mounting dimensions and connector The 140 mm (5.5 in) flange uses the international standard pattern with a 130 mm centring collar and 11 mm mounting holes; the centring collar depth is 3.5 mm, so the pilot register engages fully before the bolts tighten. Smooth shaft, 24 mm diameter, 50 mm shaft extension — no keyway, so the coupling must clamp directly onto the shaft surface. The rotatable right-angled connector lets the cable exit in any of four orientations, simplifying cable management in a crowded panel. Maximum radial force at the shaft nose is 2240 N at 1000 rpm, derating to 1550 N at 3000 rpm; axial force limit is 300 N. Stay within these for bearing life.","metaTitle":"Schneider SH31402P02F2200 Servo Motor, 3.9 kW, 3000 rpm","metaDescription":"Schneider Electric SH31402P02F2200 servo motor with brake, 3-phase, 3.9 kW continuous, 3000 rpm at 400 V, IP65, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31402P02F2200","Length":"12.2 in (310.5 mm)","Inertia":"1.8 kg.cm² of brake 12.68 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 140mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"14.48 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"164.6 lbf.in (18.6 N.m) 115 V single phase 151.3 lbf.in (17.1 N.m) 230 V single phase 108.9 lbf.in (12.3 N.m) 400 V three phase 85.9 lbf.in (9.7 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.47 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3900 W","Mounting Support":"International standard flange","Sizing reference":"SH31402P","Back emf constant":"101 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"531.9 lbf.in (60.1 N.m) 115...480 V three phase","Stator inductance":"3.855 mH","Stator resistance":"0.6 Ohm","Maximum current Irms":"44.1 A","Nominal output power":"1460 W 115 V single phase 2690 W 230 V single phase 3860 W 400 V three phase 3660 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"300 N","Output current 3s peak":"44.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"172.6 lbf.in (19.5 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"13.2 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3,496.50","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/48de31fa9c7398345e32be1c0061a4ff.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31402P02F2200/sh3-servomotor-140mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What encoder feedback does this motor use?","answer":"An absolute multiturn SinCos Hiperface encoder — no battery-backed homing needed on power-up; position is known immediately."},{"question":"What is the holding brake torque on the SH31402P02F2200?","answer":"The holding brake delivers 23 Nm (203.6 lbf·in) static torque, enough to secure a vertical load without servo current."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31402P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31402P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}