{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31402P11F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31402P11F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31402P11F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31402P11F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31402P11F2200, three-phase, 3.9 kW continuous, 23 N·m holding torque, IP65/IP67, absolute single-turn SinCos Hiperface encoder, rotatable right-angled connector.","salesMarkdown":"## Speed-torque envelope and supply voltage dependency The SH31402P11F2200 is a three-phase, 5-pole servo motor with a nominal speed that shifts with the supply — 750 rpm at 115 V single phase, 1500 rpm at 230 V single phase, 3000 rpm at 400 V three phase, and 3600 rpm at 480 V three phase. The pole count (5) is uncommon; it means the motor's base speed at a given electrical frequency differs from a standard 4-pole machine, so the drive's pole-pair parameter must be set to 5, not 4, or the speed feedback loop will be mis-scaled. Nominal torque drops as voltage rises: 164.6 lbf.in (18.6 N·m) at 115 V single phase down to 85.9 lbf.in (9.7 N·m) at 480 V three phase. The torque constant is 1.47 N·m/A at 120 °C copper temperature, so the drive's current limit directly sets the usable torque ceiling. At 44.1 A RMS maximum current, peak stall torque reaches 531.9 lbf.in (60.1 N·m) across the 115–480 V three-phase range — enough for aggressive acceleration, but only for the 3-second I²t window the drive allows. ## Holding brake and mechanical interface The integrated holding brake delivers 203.6 lbf.in (23 N·m) static torque — this is the Z-axis or vertical-load brake that keeps the load stationary when power is removed. It is not a dynamic braking resistor; the brake engages mechanically on de-energization and must not be applied while the motor is rotating above a few rpm, or the friction lining wears prematurely. Shaft is 0.9 in (24 mm) diameter with a parallel key, 2.0 in (50 mm) shaft length, 0.3 in (8 mm) key width. The motor flange is 5.5 in (140 mm) with a 0.1 in (3.5 mm) centring collar depth and 0.4 in (11 mm) mounting holes. Mounting follows the international standard flange pattern — the centring collar registers the motor concentric to the load, and the parallel key transmits torque. Maximum radial force on the shaft bearing drops with speed: 2240 N at 1000 rpm, 1780 N at 2000 rpm, 1550 N at 3000 rpm. A belt-driven or overhung load at 3000 rpm must not exceed 1550 N radial force, or bearing life shortens. Maximum axial force is 300 N. ## Encoder feedback and electrical connection Encoder is an absolute single-turn SinCos Hiperface type — single-turn means absolute position within one revolution, no battery backup needed for position at power-up within the first turn. The SinCos analog tracks allow high interpolation resolution (typically 2^12 to 2^16 counts per revolution), but the drive must support the Hiperface protocol. The rotatable right-angled connector lets the cable exit in four orientations, useful when the motor is mounted in a tight cabinet corner. Stator inductance is 3.855 mH and stator resistance is 0.6 ohm — these values set the electrical time constant and influence the drive's current-loop tuning. Back EMF constant is 101 V/krpm at 68 °F (20 °C), so at 3000 rpm the motor generates about 303 V line-to-line back EMF. The drive's DC bus must be high enough to overcome this back EMF plus the IR drop at full current. ## Environmental sealing and thermal management IP65 on the motor body and shaft bushing, IP67 on the housing — the motor is washdown-rated on the housing, but the shaft bushing is only IP65. In direct-spray food-and-bev or washdown zones, the shaft seal is the ingress point; a shaft cover or labyrinth seal may be needed for sustained IP67 exposure. Cooling is natural convection — no external fan, so the motor relies on its own surface area and the mounting flange to dissipate 3.9 kW continuous power. Ambient temperature must stay below the 266 °F (130 °C) copper hot-spot limit.","metaTitle":"Schneider Electric SH31402P11F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31402P11F2200 servo motor with brake, 3.9 kW continuous power, 23 N·m holding brake, IP65/IP67, absolute Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31402P11F2200","Length":"12.2 in (310.5 mm)","Inertia":"1.8 kg.cm² of brake 12.68 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 140mm, 2 stacks, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"14.48 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"164.6 lbf.in (18.6 N.m) 115 V single phase 151.3 lbf.in (17.1 N.m) 230 V single phase 108.9 lbf.in (12.3 N.m) 400 V three phase 85.9 lbf.in (9.7 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.47 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3900 W","Mounting Support":"International standard flange","Sizing reference":"SH31402P","Back emf constant":"101 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"531.9 lbf.in (60.1 N.m) 115...480 V three phase","Stator inductance":"3.855 mH","Stator resistance":"0.6 Ohm","Maximum current Irms":"44.1 A","Nominal output power":"1460 W 115 V single phase 2690 W 230 V single phase 3860 W 400 V three phase 3660 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"300 N","Output current 3s peak":"44.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"172.6 lbf.in (19.5 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"13.2 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2611806dc5d43a10254be3ab49450b57.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31402P11F2200/sh3-servomotor-140mm-2-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-67/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31402P11F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31402P11F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}