{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31402P12A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31402P12A2000","canonicalUrl":"https://aoctrl.com/schneider/SH31402P12A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31402P12A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31402P12A2000, three-phase, 3900 W continuous power, 3000 rpm at 400 V, 18.6 Nm nominal torque, absolute multiturn SinCos Hiperface encoder, IP65, natural convection cooling.","salesMarkdown":"## Active production, sized for the torque curve The SH31402P12A2000: This SH3 frame servo delivers 3900 W continuous power, with a nominal torque of 18.6 Nm at 400 V three-phase and a nominal speed of 3000 rpm at that same supply. The torque constant is 1.47 Nm/A at 120 °C copper temperature. ## Feedback and sealing for washdown lines The encoder is an absolute multiturn SinCos Hiperface — single-cable feedback for position and commutation, no homing sequence needed after a power cycle. This is the encoder type that drives coordinated motion in food-and-bev or packaging lines where sync matters. IP65 rating on the motor body and shaft bushing per IEC 60034-5 means it stands up to washdown without an extra cover. The rotatable right-angled connector lets the cable exit orient to the panel gland plate. ## Mounting and mechanical constraints International standard flange, 140 mm (5.5 in) flange size, centring collar diameter 130 mm (5.1 in) with a 3.5 mm (0.1 in) depth. The shaft is 24 mm (0.9 in) diameter by 50 mm (2.0 in) long with a parallel key, key width 8 mm (0.3 in). Maximum radial force Fr is 2240 N at 1000 rpm, dropping to 1550 N at 3000 rpm. Maximum axial force Fa is 300 N. Natural convection cooling — no fan, so the thermal envelope depends on the mounting surface and ambient airflow.","metaTitle":"Schneider Electric SH31402P12A2000 Servo Motor, 3900 W","metaDescription":"Schneider Electric SH31402P12A2000 SH3 servo motor. 3900 W continuous power, 3000 rpm at 400 V three-phase, 18.6 Nm torque. Absolute multiturn Hiperface","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31402P12A2000","Length":"10.7 in (272.5 mm)","Inertia":"0.0 kg.cm² of brake 12.68 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 140mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, no Brake, angular, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"12.68 kg.cm²","Nominal torque":"164.6 lbf.in (18.6 N.m) 115 V single phase 151.3 lbf.in (17.1 N.m) 230 V single phase 108.9 lbf.in (12.3 N.m) 400 V three phase 85.9 lbf.in (9.7 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.47 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3900 W","Mounting Support":"International standard flange","Sizing reference":"SH31402P","Back emf constant":"101 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"531.9 lbf.in (60.1 N.m) 115...480 V three phase","Stator inductance":"3.855 mH","Stator resistance":"0.6 Ohm","Maximum current Irms":"44.1 A","Nominal output power":"1460 W 115 V single phase 2690 W 230 V single phase 3860 W 400 V three phase 3660 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"300 N","Output current 3s peak":"44.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"172.6 lbf.in (19.5 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"13.2 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7602d82924915248118937f8df997b5f.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31402P12A2000/sh3-servomotor-140mm-2-stacks-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH31402P12A2000?","answer":"Submit an RFQ with your target quantity."},{"question":"What encoder type does SH31402P12A2000 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This provides position and commutation data over a single feedback cable without requiring a homing routine after power-up."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31402P12A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31402P12A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}