{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31403P11F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31403P11F2000","canonicalUrl":"https://aoctrl.com/schneider/SH31403P11F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31403P11F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31403P11F2000, three-phase, 4.1 kW continuous, 140 mm flange, absolute single-turn SinCos Hiperface encoder, IP54/IP65.","salesMarkdown":"## Motor ratings and drive pairing — what the voltage-dependent specs mean for your build The SH31403P11F2000 is a three-phase servo motor from the SH3 family, delivering 4.1 kW continuous power. Its nominal speed and torque are voltage-dependent: at 400 V three-phase it produces 3000 rpm and 12.9 N.m; at 480 V three-phase it reaches 3600 rpm and 9.1 N.m. This means the drive supply voltage directly sets the machine's top speed and available torque — a 480 V line gives higher speed but lower torque per amp. Peak stall torque is 90.2 N.m across the 115...480 V three-phase range, with a corresponding peak current of 61.0 A. The drive must be sized to supply this peak current for acceleration and deceleration transients, not just the continuous torque figure. The holding brake delivers 36 N.m of holding torque, enough to keep a vertical load stationary when the drive is disabled. The brake is included — no external brake resistor or mechanical lock needed for standstill holding. ## Encoder feedback and mechanical fit — what connects where Feedback is via an absolute single-turn SinCos Hiperface encoder. This is a digital-plus-analog protocol common on Schneider Lexium drives — confirm your drive model supports Hiperface before wiring. Single-turn means absolute position within one revolution; multi-turn position requires a separate multi-turn encoder variant. The motor flange is 140 mm (5.5 in) with an international standard flange pattern. Shaft diameter is 24 mm with a parallel key, shaft length 50 mm. The centring collar depth is 3.5 mm. Mounting holes are 11 mm diameter — M10 or 3/8-inch bolts fit. Overall length is 365.5 mm (14.4 in). The electrical connection uses a rotatable right-angled connector — the cable exit angle can be adjusted in the field to fit tight cabinet layouts. ## Environmental sealing and cooling — where this motor can run IP rating depends on the shaft seal fitted: IP54 with the standard shaft bushing (no shaft seal ring), IP65 with the optional shaft seal ring. The motor body itself is IP65-rated. For washdown or dust-prone environments, specify the shaft seal ring variant. Cooling is by natural convection — no external fan or forced air required. This simplifies installation but means the continuous torque rating assumes free airflow around the motor body; derating applies if mounted in a confined space or against a panel face. Sourced through independent distribution channels. No stock-holding claim; quoted per RFQ.","metaTitle":"Schneider Electric SH31403P11F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31403P11F2000 SH3 servo motor with holding brake. 4.1 kW continuous, 90.2 N.m peak torque, absolute single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31403P11F2000","Length":"14.4 in (365.5 mm)","Inertia":"5.5 kg.cm² of brake 17.94 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 140mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"23.44 kg.cm²","Holding torque":"318.6 lbf.in (36 N.m)","Nominal torque":"218.6 lbf.in (24.7 N.m) 115 V single phase 187.6 lbf.in (21.2 N.m) 230 V single phase 114.2 lbf.in (12.9 N.m) 400 V three phase 80.5 lbf.in (9.1 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.58 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4100 W","Mounting Support":"International standard flange","Sizing reference":"SH31403P","Back emf constant":"105 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"798.3 lbf.in (90.2 N.m) 115...480 V three phase","Stator inductance":"2.66 mH","Stator resistance":"0.4 Ohm","Maximum current Irms":"61.0 A","Nominal output power":"1940 W 115 V single phase 3330 W 230 V single phase 4050 W 400 V three phase 3430 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"300 N","Output current 3s peak":"61.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"246.05 lbf.in (27.8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"2420 N 1000 rpm 1920 N 2000 rpm 1670 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"17.6 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/82539714fee8d21cf2c32519ef37f9e1.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH31403P11F2000/sh3-servomotor-140mm-3-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What drive voltage gives the highest torque from SH31403P11F2000?","answer":"At 115 V single-phase the nominal torque is 24.7 N.m at 750 rpm. Torque drops as voltage rises: 21.2 N.m at 230 V, 12.9 N.m at 400 V three-phase, and 9.1 N.m at 480 V three-phase. For maximum torque, run at the lowest available voltage that meets your speed requirement."},{"question":"What is the holding brake torque on this servo motor?","answer":"The holding brake delivers 36 N.m of holding torque. This is sufficient to hold a vertical load at standstill without power applied to the motor windings."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31403P11F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31403P11F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}