{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31404P01F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31404P01F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31404P01F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31404P01F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31404P01F1200, three-phase, 4040 W continuous power, 3000 rpm at 400 V, IP65, absolute single-turn SinCos Hiperface encoder, smooth shaft, 5.5 in (140 mm) flange.","salesMarkdown":"## What this SH31404P01F1200 delivers that a plain servo doesn't The SH31404P01F1200 is a three-phase servo motor with an integrated holding brake, rated for 4040 W continuous power at 400 V three-phase supply. The nominal speed at that voltage is 3000 rpm, and the nominal torque is 12.9 N.m (114.2 lbf.in). The absolute single-turn SinCos Hiperface encoder means the drive knows the rotor position at power-up — no homing cycle needed on a single-turn application. For multi-turn travel, the drive or controller handles the wrap-around logic. ## Torque and speed across the supply voltage range This motor delivers different torque and speed depending on the supply. At 400 V three-phase, nominal torque is 12.9 N.m at 3000 rpm; at 480 V three-phase, it's 11.1 N.m at 3600 rpm. On single-phase 115 V, nominal torque drops to 30.2 N.m at 750 rpm, and on 230 V single-phase, 26.3 N.m at 1500 rpm. Peak stall torque across the 115...480 V three-phase range is 131.9 N.m (1167.4 lbf.in), and continuous stall torque is 33.4 N.m (295.6 lbf.in) — the continuous rating is the one to size for, not the peak. The torque constant is 1.57 N.m/A at 120 °C copper temperature, and the back EMF constant is 104 V/krpm at 20 °C. These let the drive calculate the actual torque from the current feedback. ## Mounting and environmental fit for a production line The motor mounts on an international standard flange with a 140 mm (5.5 in) pilot diameter and a 130 mm (5.1 in) centring collar, secured through four 11 mm holes. The overall length is 420.5 mm (16.6 in) — measure the available envelope before ordering. IP65 on the motor body and shaft bushing, IP67 on the housing — both per IEC 60034-5. That means the motor handles washdown spray and temporary immersion at the shaft seal, which is the usual failure point on a food-line or wet-area servo. Cooling is natural convection, so no fan or coolant lines. The continuous power rating assumes free airflow around the flange and body — don't box it into a tight enclosure without derating. Sourced through independent distribution channels. No stock-holding claim; quoted per order.","metaTitle":"Schneider Electric SH31404P01F1200 Servo Motor with Brake","metaDescription":"SH31404P01F1200 Schneider Electric servo motor with brake, 4040 W continuous power, 3000 rpm at 400 V three-phase, IP65, absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31404P01F1200","Length":"16.6 in (420.5 mm)","Inertia":"5.5 kg.cm² of brake 23.7 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 140mm, 4 stacks, smooth Shaft, SinCos Singleturn 128, Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"29.2 kg.cm²","Holding torque":"318.6 lbf.in (36 N.m)","Nominal torque":"267.3 lbf.in (30.2 N.m) 115 V single phase 232.8 lbf.in (26.3 N.m) 230 V single phase 114.2 lbf.in (12.9 N.m) 400 V three phase 98.2 lbf.in (11.1 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.57 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4040 W","Mounting Support":"International standard flange","Sizing reference":"SH31404P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"1167.4 lbf.in (131.9 N.m) 115...480 V three phase","Stator inductance":"2.035 mH","Stator resistance":"0.28 Ohm","Maximum current Irms":"95.6 A","Nominal output power":"2370 W 115 V single phase 4130 W 230 V single phase 4040 W 400 V three phase 4190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"300 N","Output current 3s peak":"95.6 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"295.6 lbf.in (33.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"2660 N 1000 rpm 2110 N 2000 rpm 1840 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"21.3 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/111a56485c3171ed54422a51004440fe.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31404P01F1200/sh3-servomotor-140mm-4-stacks-smooth-shaft-sincos-singleturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH31404P01F1200?","answer":"The motor carries IP65/IP67 ratings conforming to IEC 60034-5. Standard Schneider documentation includes the product data sheet and installation manual. RoHS and REACH compliance are typical for current Schneider servo motors, but the specific declarations are confirmed at order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31404P01F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31404P01F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}