{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31404P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31404P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31404P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31404P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31404P02F2200, 4040 W continuous power, 3000 rpm at 400 V three-phase, 36 N.m holding brake, absolute multiturn SinCos Hiperface encoder, IP65 motor, smooth shaft, 140 mm flange.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH31404P02F2200: This SH3 frame servo delivers 3000 rpm nominal at 400 V three-phase input, stepping to 3600 rpm at 480 V three-phase. On single-phase supplies the speed ceiling drops to 1500 rpm at 230 V or 750 rpm at 115 V — the winding configuration limits the bus voltage available to the drive. Nominal torque varies significantly with supply: 30.2 N.m at 115 V single-phase, 26.3 N.m at 230 V single-phase, 12.9 N.m at 400 V three-phase, and 11.1 N.m at 480 V three-phase. The torque derating reflects the available current from the drive at each line voltage. Continuous power is 4040 W at 400 V three-phase, with 4190 W available at 480 V three-phase. The 2370 W figure at 115 V single-phase confirms this motor is primarily designed for three-phase installations. ## Brake, encoder, and mechanical interface Feedback comes from an absolute multiturn SinCos Hiperface encoder — no homing cycle needed on power-up for position-aware applications. The encoder type supports high-resolution velocity and position loops over the Hiperface serial protocol. The motor mounts on a 140 mm international standard flange with a 130 mm centring collar and 11 mm mounting holes. The smooth shaft measures 24 mm diameter by 50 mm length — no keyway, so the coupling must transmit torque through a clamping or friction fit. ## Environmental sealing and cooling IP65 rating on the motor body and shaft bushing per IEC 60034-5, with IP67 on the housing — the motor withstands washdown and dust ingress in food, beverage, or wet machining environments. The rotatable right-angled connector allows cable exit orientation adjustment during installation. Cooling is by natural convection only — no forced-air fan. The continuous stall torque of 33.4 N.m across the 115-480 V three-phase range defines the thermal limit under locked-rotor conditions. ## Electrical parameters and peak capability Stator resistance is 0.28 Ohm with 2.035 mH inductance, giving a torque constant of 1.57 N.m/A at 120 °C copper temperature. The back EMF constant is 104 V/krpm at 20 °C — match this to the drive's DC bus voltage to avoid overspeed saturation. Peak stall torque reaches 131.9 N.m at 95.6 A peak current for 3 seconds — this is the acceleration limit for short-duration moves. The maximum continuous RMS current is 95.6 A, which sets the drive sizing requirement. No pin-compatible alternative exists within the SH3 family — the sizing reference SH31404P defines the frame length, flange, and winding. Any substitution would require a different frame size or winding variant.","metaTitle":"Schneider Electric SH31404P02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31404P02F2200 SH3 servo motor, 4040 W continuous power, 3000 rpm at 400 V three-phase, with holding brake and absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"16.6 in (420.5 mm)","Inertia":"5.5 kg.cm² of brake 23.7 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"29.2 kg.cm²","Holding torque":"318.6 lbf.in (36 N.m)","Nominal torque":"267.3 lbf.in (30.2 N.m) 115 V single phase 232.8 lbf.in (26.3 N.m) 230 V single phase 114.2 lbf.in (12.9 N.m) 400 V three phase 98.2 lbf.in (11.1 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.57 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4040 W","Mounting Support":"International standard flange","Sizing reference":"SH31404P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"1167.4 lbf.in (131.9 N.m) 115...480 V three phase","Stator inductance":"2.035 mH","Stator resistance":"0.28 Ohm","Maximum current Irms":"95.6 A","Nominal output power":"2370 W 115 V single phase 4130 W 230 V single phase 4040 W 400 V three phase 4190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"300 N","Output current 3s peak":"95.6 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"295.6 lbf.in (33.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"2660 N 1000 rpm 2110 N 2000 rpm 1840 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"21.3 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4,194.18","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9f49f8d41fe052a4281bdeac3cb18a9e.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31404P02F2200/sh3-servomotor-140mm-4-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31404P02F2200/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH31404P02F2200?","answer":"Submit an RFQ through this listing — the sourcing desk will return a landed-cost quote including duty and freight terms."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31404P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31404P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}