{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31404P11A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31404P11A2100","canonicalUrl":"https://aoctrl.com/schneider/SH31404P11A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31404P11A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31404P11A2100, 4040 W continuous power, 3000 rpm at 400 V three-phase, 30.2 Nm nominal torque, IP65, absolute single-turn SinCos Hiperface encoder, natural convection cooling.","salesMarkdown":"## Active production — what that means for your BOM The SH31404P11A2100: For a packaging-machinery OEM, this means the part is qualified for serial production without requalification risk — the BOM position is stable for the foreseeable build schedule. ## Speed-torque envelope across supply voltages This SH3 servo motor delivers different performance depending on the supply: at 400 V three-phase, nominal speed is 3000 rpm with 12.9 Nm nominal torque and 4040 W continuous power; at 480 V three-phase, speed reaches 3600 rpm with 11.1 Nm and 4190 W. On single-phase supplies, the motor still runs but at reduced output: 750 rpm / 30.2 Nm / 2370 W at 115 V, and 1500 rpm / 26.3 Nm / 4130 W at 230 V. The continuous stall torque across all three-phase supplies is 33.4 Nm, and peak stall torque reaches 131.9 Nm. ## Encoder feedback and environmental sealing The motor carries an absolute single-turn SinCos Hiperface encoder — this gives position feedback on power-up without a homing cycle, critical for applications where the machine must resume from the last known position after a power loss. IP65 protection applies to both the motor body and the shaft bushing per IEC 60034-5, so the unit handles washdown environments in food-and-beverage or packaging lines without additional shrouding. ## Mechanical interface and mounting dimensions The motor uses an international standard flange with a 140 mm (5.5 in) flange size, a 130 mm centring collar diameter, and four 11 mm mounting holes on the bolt circle. Overall length is 382.5 mm (15.06 in). The shaft is 24 mm diameter with a 50 mm length, a parallel keyway (8 mm key width), and is rated for 2660 N radial force at 1000 rpm, derating to 1840 N at 3000 rpm. Maximum axial force is 300 N. ## Electrical parameters for drive tuning Stator resistance is 0.28 Ω and inductance is 2.035 mH — these values set the electrical time constant and inform the current-loop tuning in the servo drive. The torque constant is 1.57 Nm/A at 120 °C copper temperature, and the back EMF constant is 104 V/krpm at 20 °C. Peak current capability is 95.6 A for 3 seconds, which supports the 131.9 Nm peak stall torque for acceleration and deceleration phases. The motor is naturally convection cooled — no external fan or forced air is required.","metaTitle":"Schneider Electric SH31404P11A2100 Servo Motor, 4040 W","metaDescription":"Schneider Electric SH31404P11A2100 SH3 servo motor, 4040 W continuous power, 3000 rpm at 400 V three-phase, IP65, absolute single-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"15.06 in (382.5 mm)","Inertia":"0.0 kg.cm² of brake 23.7 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"23.7 kg.cm²","Nominal torque":"267.3 lbf.in (30.2 N.m) 115 V single phase 232.8 lbf.in (26.3 N.m) 230 V single phase 114.2 lbf.in (12.9 N.m) 400 V three phase 98.2 lbf.in (11.1 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.57 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4040 W","Mounting Support":"International standard flange","Sizing reference":"SH31404P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"1167.4 lbf.in (131.9 N.m) 115...480 V three phase","Stator inductance":"2.035 mH","Stator resistance":"0.28 Ohm","Maximum current Irms":"95.6 A","Nominal output power":"2370 W 115 V single phase 4130 W 230 V single phase 4040 W 400 V three phase 4190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"300 N","Output current 3s peak":"95.6 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"295.6 lbf.in (33.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"2660 N 1000 rpm 2110 N 2000 rpm 1840 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"21.3 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6cd28aa2ba97caf94ad5ed17ba39c710.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH31404P11A2100/sh3-servomotor-140mm-4-stacks-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31404P11A2100/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH31404P11A2100 in the SH3 family?","answer":"No official successor or pin-compatible alternative is recorded for this specific order code. The SH31404P sizing reference defines the frame size and performance class; any replacement would require reviewing the full SH3 family specification against the application's torque and speed requirements."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31404P11A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31404P11A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}