{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31404P11F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31404P11F2100","canonicalUrl":"https://aoctrl.com/schneider/SH31404P11F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31404P11F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31404P11F2100, three-phase, 4040 W continuous power, 36 N·m holding torque, IP65, absolute single-turn Hiperface encoder, 140 mm flange.","salesMarkdown":"## Speed-torque envelope by supply voltage The SH31404P11F2100 delivers 3000 rpm at 400 V three-phase and 3600 rpm at 480 V three-phase, with nominal torque dropping from 12.9 N·m at 400 V to 11.1 N·m at 480 V — the torque constant of 1.57 N·m/A at 120 °C hot copper sets the thermal limit under continuous load. On single-phase supply, speed is limited to 750 rpm at 115 V or 1500 rpm at 230 V, with correspondingly higher nominal torque (30.2 N·m and 26.3 N·m respectively) — useful for low-speed high-torque positioning without a gearbox. ## Brake and mechanical interface Mounting uses an international standard 140 mm flange with a 24 mm shaft and parallel key, 50 mm shaft length. The IP65 rating (motor and shaft bushing per IEC 60034-5) means it withstands washdown in food or packaging lines without a secondary cover. ## Encoder and electrical connection The absolute single-turn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — critical for applications where the axis must resume position after a power loss. The rotatable right-angle connector eases cable routing in tight cabinets.","metaTitle":"Schneider Electric SH31404P11F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31404P11F2100 servo motor with brake, 4040 W continuous power, 36 N·m holding torque, IP65, absolute single-turn encoder. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31404P11F2100","Length":"16.6 in (420.5 mm)","Inertia":"5.5 kg.cm² of brake 23.7 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 140mm, 4 stacks, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"29.2 kg.cm²","Holding torque":"318.6 lbf.in (36 N.m)","Nominal torque":"267.3 lbf.in (30.2 N.m) 115 V single phase 232.8 lbf.in (26.3 N.m) 230 V single phase 114.2 lbf.in (12.9 N.m) 400 V three phase 98.2 lbf.in (11.1 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.57 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4040 W","Mounting Support":"International standard flange","Sizing reference":"SH31404P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"1167.4 lbf.in (131.9 N.m) 115...480 V three phase","Stator inductance":"2.035 mH","Stator resistance":"0.28 Ohm","Maximum current Irms":"95.6 A","Nominal output power":"2370 W 115 V single phase 4130 W 230 V single phase 4040 W 400 V three phase 4190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"300 N","Output current 3s peak":"95.6 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"295.6 lbf.in (33.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"2660 N 1000 rpm 2110 N 2000 rpm 1840 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"21.3 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/46cf8d145b5c764ae16ef61c4c1bcd17.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31404P11F2100/sh3-servomotor-140mm-4-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-65/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31404P11F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31404P11F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}