{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31404P12F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31404P12F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31404P12F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31404P12F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH31404P12F2200 servo motor with brake, Three phase, 4.0 kW continuous power, 36 N·m holding torque, IP65/IP67, absolute multiturn SinCos Hiperface encoder, 140 mm flange.","salesMarkdown":"## Speed-torque envelope by supply voltage The SH31404P12F2200: This motor delivers 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase — the speed is supply-dependent, not a fixed rating. Nominal torque varies with the same supply: 30.2 N·m at 115 V single-phase, 26.3 N·m at 230 V single-phase, 12.9 N·m at 400 V three-phase, and 11.1 N·m at 480 V three-phase. The 115 V and 230 V single-phase curves deliver higher torque at lower speeds, suited for direct-drive applications without a gearbox. Peak stall torque reaches 131.9 N·m across the 115...480 V three-phase range, with a 3-second peak current of 95.6 A — this is the transient overload ceiling for acceleration or emergency stops. ## Brake and encoder — what locks and what tracks Holding brake torque is 36 N·m, sufficient to hold a vertical load on a Z-axis or gantry without power — the brake engages when the drive enable drops, not on a separate signal. The absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle after power loss — the multiturn count tracks shaft revolutions even unpowered, eliminating re-referencing on restart. ## Mechanical fit and environmental sealing Motor flange size is 140 mm (5.5 in) with a centring collar depth of 3.5 mm — mounts to standard IEC B5 or IM B5 flanges. Overall length is 420.5 mm (16.6 in), including the rotatable right-angled connector. IP65 on the motor body and shaft bushing, IP67 on the housing — the motor withstands washdown and temporary submersion when the connector is mated and the shaft seal is intact. Natural convection cooling means no external fan or compressed air is needed. Shaft diameter is 24 mm with a parallel key, key width 8 mm, shaft length 50 mm — standard for coupling to a load via a flexible jaw or bellows coupling. ## Electrical parameters for drive tuning Stator resistance is 0.28 Ω and stator inductance is 2.035 mH — these values set the current-loop bandwidth and the L/R time constant for the drive's auto-tuning routine. Torque constant is 1.57 N·m/A at 120 °C copper temperature; the back EMF constant is 104 V/krpm at 20 °C. These are the conversion factors between current and torque, and speed and voltage, respectively — used to calibrate the drive's torque and speed loops. Continuous power is 4040 W at 400 V three-phase, with nominal output power of 4190 W at 480 V three-phase — the motor is sized for a 4 kW class application with headroom at higher line voltages. The sizing reference SH31404P indicates the motor frame and winding variant — the full order code SH31404P12F2200 includes the brake, connector orientation, and cable length options.","metaTitle":"Schneider Electric SH31404P12F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31404P12F2200 servo motor with brake, 4 kW continuous power, 36 N·m holding torque, IP65/IP67, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31404P12F2200","Length":"16.6 in (420.5 mm)","Inertia":"5.5 kg.cm² of brake 23.7 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 140mm, 4 stacks, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"29.2 kg.cm²","Holding torque":"318.6 lbf.in (36 N.m)","Nominal torque":"267.3 lbf.in (30.2 N.m) 115 V single phase 232.8 lbf.in (26.3 N.m) 230 V single phase 114.2 lbf.in (12.9 N.m) 400 V three phase 98.2 lbf.in (11.1 N.m) 480 V three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.57 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4040 W","Mounting Support":"International standard flange","Sizing reference":"SH31404P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"1167.4 lbf.in (131.9 N.m) 115...480 V three phase","Stator inductance":"2.035 mH","Stator resistance":"0.28 Ohm","Maximum current Irms":"95.6 A","Nominal output power":"2370 W 115 V single phase 4130 W 230 V single phase 4040 W 400 V three phase 4190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"300 N","Output current 3s peak":"95.6 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"295.6 lbf.in (33.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"2660 N 1000 rpm 2110 N 2000 rpm 1840 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"21.3 A","Maximum mechanical speed":"4000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d6a108d39325e1743612e52f7d54b829.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31404P12F2200/sh3-servomotor-140mm-4-stacks-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is SH31404P12F2200's listed phase and speed range?","answer":"The motor is three-phase and delivers 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase."},{"question":"What compliance documentation does Schneider Electric provide for SH31404P12F2200?","answer":"The motor carries IP65/IP67 protection per IEC 60034-5. The evidence does not list RoHS, REACH, UL, or IEC declarations — confirm with the order desk at RFQ time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31404P12F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31404P12F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}