{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P01A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P01A2000","canonicalUrl":"https://aoctrl.com/schneider/SH32051P01A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P01A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, sizing reference SH32051P, 5.5 kW continuous power, 3000 rpm at 400 V three phase, absolute single-turn SinCos Hiperface encoder, IP65, smooth shaft.","salesMarkdown":"## 5.5 kW continuous, 3000 rpm at 400 V three-phase The SH32051P01A2000: Nominal torque tracks the supply: 31.9 N.m at 115 V single phase, 27 N.m at 230 V single phase, 17.5 N.m at 400 V three phase, and 13.8 N.m at 480 V three phase — so above 400 V the motor delivers higher speed with lower torque, the standard constant-V/Hz trade-off a panel builder sizes against the gearbox ratio. ## Peak torque 110 N.m, peak current 87.2 A Peak stall torque is 110 N.m across the 115 to 480 V range, and the 3-second peak output current is 87.2 A — matching the maximum Irms of 87.2 A, so the drive sizing exercise must sustain 87.2 A briefly during acceleration ramps without tripping the drive's peak-current foldback. Continuous stall current is 21 A, the figure a thermal budget for low-speed continuous duty should hold to. ## Hiperface absolute encoder, rotatable connector, IP65 The electrical interface is a rotatable right-angled connector, so the cable exit can be indexed to one of several orientations during install to clear the cabinet bend radius. ## 205 mm flange, smooth 38 mm shaft, 321 mm body The motor mounts on an international-standard flange, 205 mm (8.07 in) across, with a 180 mm centring collar and 14 mm mounting holes — the standard pattern for this size class of servo. Shaft is 38 mm diameter by 80 mm long, smooth (no keyway), so coupling to the load is via a friction-fit or clamp-style coupling rather than a keyed connection. Body length is 321 mm (12.6 in) and the cooling is natural convection — meaning no integrated fan and no forced-air clearance requirement behind the motor, but also no derating headroom for mounting in a fully enclosed cabinet without thermal assessment. Lifecycle stage is recorded as current — no end-of-life notice on file for the SH32051P01A2000 sizing reference. No stock-holding promise is made here; lead time is the manufacturer's then-current schedule at the moment of the quote.","metaTitle":"SH32051P01A2000 Servo Motor, 5.5 kW, 3000 rpm, Hiperface","metaDescription":"Schneider Electric SH32051P01A2000 SH3 servo motor, 5.5 kW continuous at 400 V three phase, 3000 rpm, IP65, Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P01A2000","Length":"12.6 in (321 mm)","Inertia":"0.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 1 stack, smooth Shaft, SinCos Singleturn 128, no Brake, angular, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/ca/en/product/download-pdf/SH32051P01A2000?filename=Schneider+Electric_Lexium-52-Motors_SH32051P01A2000.pdf', 'path_name': 'df7ee7e820f0167d8cd4fa66064e4ff6.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/df7ee7e820f0167d8cd4fa66064e4ff6.pdf', 'status': 1}","sourceUrl":"https://www.se.com/ca/en/product/SH32051P01A2000/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-singleturn-128-no-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"Who supplies SH32051P01A2000 and how is it quoted for volume purchases?","answer":"The SH32051P01A2000 is sourced through independent industrial-automation distribution against an RFQ."},{"question":"What is the listed phase and length for SH32051P01A2000?","answer":"Phase is three phase and body length is 12.6 in (321 mm). The motor runs across 115 V single phase through 480 V three phase, with the full 5.5 kW continuous output available at 400 V three phase."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P01A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P01A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}